Conventions The “Switch” mentioned in this User Guide stands for following products: XM-SW1008D; XM-SW1016D; XM-SW1024, without any explanations. All these devices are sharing this User Guide. All product models listed just differ in appearance and figures in this User Guide.
10/100Mbps Switch The Switch LEDs are located on the front panel: Status Indication The Switch is Powered On No power source Power *Please check if the power cord is connected to Switch properly, and make sure the Power is On. The corresponding Ethernet port is connected to a network device.
Need help?
Do you have a question about the XM-SW1008D and is the answer not in the manual?
Questions and answers