Chevrolet Sail U-VA Owner's Manual page 131

6. Use a screwdriver to remove the
wheel cover (if equipped).
7. Use the wheel wrench to loosen the
wheel nuts by a half to one turn
each. Do not loosen them com-
pletely.
HEX0156
8. Insert the jack into the position
indicated by the arrows (where
there is a half circle notch).
HEX0143
9. The jack should be placed at a
jacking point nearest to the tire you
want to change. The jack lift head
HEX0142
(indicated by the arrow) should be
placed around the vertical lugs and
inserted into the notch of the lugs.
Vehicle Maintenance 127
G6D5002A