Advertisement
Advertisement
Related Manuals for Uclear HBC220 SNOW
Summary of Contents for Uclear HBC220 SNOW
- Page 1 HBC 220 SNOW ® Helmet Communication User Manual ® US-PUB#2E...
- Page 2 LICENCES: User Manual The UCLEAR trademark and logo is exclusively owned by BITwave Pte Ltd. Any use of the mark by any other parties without prior written permission of BITwave Pte Ltd constitutes an infringement of legal rights. The Bluetooth trademark is owned by Bluetooth SIG and is used under licence by BITwave Pte Ltd.
-
Page 3: Table Of Contents
Notices Contents T ECHNICAL SUPPORT: For additional information please visit our website at www.uclear-digital.com Contents ----------------------------------------------------------------------- 1 Quick User Guide ----------------------------------------------------------- For customer and technical support in the US and Canada, please contact: BITwave USA LLC Warnings and Safety Instructions --------------------------------------- 7 1093 E lron Eagle Dr. -
Page 4: Quick User Guide
Before using your HBC220 SNOW please charge it first! Do not open the seal of the hardware, tamper, repair or modify any parts. Do Visit uclear-digital.com to complete product registration to activate your warranty and not touch the product with metal objects or parts or chemical products. - Page 5 BITwave and reserve the right to amend or improve the product design or user guide without any restrictions and without any obligation to notify users. All information here is accurate as of the date of printing. Please visit uclear-digital.com to download the latest firmware for feature enhancements. Reset From the on position, press all 3 buttons at once.
- Page 6 Quick User Guide Notices MOBILE PHONE FUNCTIONS Pairing your HBC220 SNOW with your mobile phone. Unit must be power on to Warranty does not cover data recovery and physical deterioration due to use, damages perform following functions. resulting from accidents, storage, loss or data loss or damage during repairs or transits.
- Page 7 MUSIC STREAMING FUNCTION BATTERY WARNING: *NOTE: For music Bluetooth adaptor you would need to pair the music Bluetooth adaptor before using it with HBC220 SNOW. helmet communicator contains a rechargeable lithium ion polymer battery. To reduce risks of fire or burns, do not disassemble, crush, puncture, short external contacts or dispose in fire or water.
- Page 8 Notices Warning and Safety Instructions Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This manual uses the icons to highlight certain instructions. Below is an explanation of the icons. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
-
Page 9: Warnings And Safety Instructions
Technical Data Warnings and Safety Instructions Unit Dimensions (L x W X H) 75mm x 45mm x 26mm > Prolonged exposure to loud sounds may lead to permanent hearing damage. Weight > Do not attempt to place an outgoing call through the mobile phone while riding on the Audio motorcycle at any point of time. -
Page 10: Features
Status Indicator Configurations Summary Features The table below shows the status indicator configurations. helmet communicator has three main functions: to make mobile phone calls, to listen to music and for intercom communication. State Status Indicator Mobile Phone Functions Off (No Power) •... -
Page 11: Installation
Installation Button Configurations Summary Action Button HBC220 SNOW helmet communication system contains: Common Instruction Commands Power on Hold Answer for 2 seconds HBC220 SNOW control unit Power off Hold Answer for 5 seconds Activate Bluetooth Pairing Hold Up & Down for 2 seconds... - Page 12 Installation GPS Device Install Speakers To use a GPS device with the UCLEAR HBC220 SNOW, the two must first be paired. • Use the plastic inserts (optional) to ensure a firm and secure mounting area for the speaker. Pairing the HBC220 SNOW to a GPS Device •Turn on the HBC220 SNOW helment communicator and GPS device...
- Page 13 • Use the Velcro to secure Side Mounted Helmet Strap in Place. Firmware Upgrade •Please check out www.uclear-digital.com for new firmware update...
- Page 14 • Carefully place the Metal Mounting Bracket onto the position identified in step 1. (You may only do this step once) • Make sure that permanent metal mounting clip is installed showing the UCLEAR Logo right side up with the 2 side holes at the top and the metal prong pointing down.
-
Page 15: General Operations
HBC220 SNOW is not connected to any other devices, the system will auto shutdown in 4.Hold 3 seconds Answer and Up buttons on the 3rd device releasing when you see a 10 minutes. - Page 16 To use the intercom for the first time, you must pair your communictor to another • To charge the helmet communicator, connect the provided charging cable to the speaker/ HBC220 SNOW unit. charging socket. Upon charging, if the unit is on, the system will automatically initiate power down.
-
Page 17: Mobile Phone Operations
•Next, turn on the mobile phone Bluetooth functions and search for Bluetooth devices. Select ‘HBC220 SNOW’ to pair with the desired device. •When prompted to enter a passcode, enter ‘0000’. *Most mobile phones when paired would be automatically connected with both phone and music Bluetooth capabilities. -
Page 18: Music Streaming Operations
Mobile Phone Operations Music Streaming Operations Last Number Redial To use the helmet communicator with your music devices you must connect •To redial the last number, hold the Up and Answer buttons for 2 seconds. The capability of them wirelessly through Bluetooth pairing. This step is only required for Bluetooth this function is dependent on the mobile phone used.