Storage Management - Grundig GEC-D2201AR Owner's Manual

1 channel video encoder
Table of Contents

Advertisement

9.11. Storage Management

Users can store local recordings on a Micro SD/SDHC card up to 16 GB. This page shows the capacity information
of the Micro SD card and a recording list with all the recording files saved on the memory card. Users can also
format the SD card and implement automatic recording cleanup through the setting page.
To implement Micro SD card recording, please go to the "Recording" page (see 9.12. Recording) for activation.
NOTE: Please format the Micro SD/SDHC card when using it for the first time. Formatting will also be required
when a memory card has already been used on one product and was later transferred to another product with a
different software platform.
Device Information :
When users insert the Micro SD/SDHC card, the card information such as the memory capacity and status will be
shown in the Device Information section. The memory card is successfully installed if its status is shown in the
"Device information" section in the Storage Management page.
Device Setting :
Click on the "Format" button to format the memory card.
Disk Cleanup Setting :
Users can enable an automatic recordings cleanup by checking this item and specifying the time and storage
limits.
Recording List :
Each video file on the Micro SD/SDHC card will be listed in the Recording list as shown below. The maximum file
size is 60 MB (60 MB per file).
If the recording modus is set to "Always" and at the same time the event recording (when a motion detection or
an alarm takes place) is also turned on, in this case, when an event occurs, the event will be recorded first,
afterwards the Video Server will return to normal recording mode.
45
English

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents