Advertisement
Quick Links
HDMI 1.4 Matrix 6×2
User manual
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this
manual for future reference.
I.
Introduction
Advertisement
Summary of Contents for SHENZHEN HDCVT CV-HDM-962
- Page 1 HDMI 1.4 Matrix 6×2 User manual Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. Introduction...
- Page 2 The HDMI matrix 6*2 with 4kx2k supported which allows HDMI signal from any of its six sources to be routed to and displayed on any of its two connected HDMI displays simultaneously. It supports 3D, 3Gbps bandwidth, 12-bit Deep Color, Hi-Def lossless audio and other features defined by HDMI specifications.
- Page 3 Full audio input and output support III. Package HDMI 1.4 Matrix 6*2------------------------------1PCS 5V/2A DC Power Supply Adapter---------------------1PCS Remote control---------------------------------------1PCS Operation Manual ----------------------------------1PCS MHL to HDMI Cable (optional) IV. Specifications Frequency Bandwidth 2.97Gbps Input Ports 6 x HDMI Female. Output port 2 x HDMI Female;...
- Page 4 HDMI Audio Output PCM2, 5.1, 7.1CH, Dolby 5.1, DTS5.1, D-TrueHD, DTS-HD Power Supply 5V/2A DC (US/EU standards, CE/FCC/UL certified) ESD Protection Human Body Model: ± 8kV (air-gap discharge) ± 4kV (contact discharge) Dimensions (mm) 250(D) x110 (W) x 26(H) Weight (g) Power Consumption(max) 10W Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F...
- Page 5 ON/OFF: Power on/off switch. Input LED: These red LED illuminate when the output select to the corresponding input. Audio EDID LED: These red LED illuminate when the audio EDID select to corresponding audio. ARC LED: This red LED illuminate when the ARC function open. POWER LED: This red LED illuminate when the device is connected with power supply.
- Page 6 RST: Press this button the matrix will reset to factory state(INPUT1, 2.0CH AUDIO MODE,ARC function closed) Rear Panel Input Source: These slot is where you connect the HDMI source output from DVD, PS3. HDMI OUT: This slot is where you connect the HDTV or monitor with HDMI cable. Toslink OUT: This slot is where you connect to the amplifier with optical fiber cable.
- Page 7 Attention: 1. The Toslink and Stereo audio follow the OUT A HDMI audio. 2. The In6 （ The sixth input port ） support MHL input only,use MHL to HDMI Cable to connect smart phone and matrix. Remote control STANDBY: Press this button will standby or power on the matrix.
- Page 8 and the LED will indicate the corresponding state. PIP: Press this button will Open or close the PIP function.When open PIP function,the OUTA and OUTB will switch to the same input source. Select: Press this button will select the PIP source. Enter: Press this button will confirm the select PIP source.
- Page 9 VI. Application Example...
Need help?
Do you have a question about the CV-HDM-962 and is the answer not in the manual?
Questions and answers