Advertisement
Quick Links
(plus CLB-BLUETOOTH Module)
Installation Guide
Before installation please take the time to read and understand the enclosed
information.
What's included in the box?
• 1x CLB-AVID Amplifier
• 1x 24v DC 1.25A PSU
• 1x IR Remote Control Unit
• 1 x Reducing Module
06/13
Advertisement
Related Manuals for CIE-Group CLB-AVID
Summary of Contents for CIE-Group CLB-AVID
-
Page 1: Installation Guide
Installation Guide Before installation please take the time to read and understand the enclosed information. What’s included in the box? • 1x CLB-AVID Amplifier • 1x 24v DC 1.25A PSU • 1x IR Remote Control Unit • 1 x Reducing Module... - Page 2 CLB-AVID Description The CLB-AVID Amplifier Module is a discreet 2 x 20W stereo amplifier for modular faceplate or dado conduit mounting. Part of the Conec2 range of Modular Faceplates, the new CLB-AVID is an ideal solution for AV and single-room voice or sound reinforcement applications and can be integrated into a wide range of faceplate options and paired with any of the Conec2 connectivity modules.
-
Page 3: Specifications
Introduction: The depth of the CLB-AVID unit will allow installation into standard UK 2-gang EO boxes, with a minimum of 40mm depth. These may be galvanised metal for installation in solid construction walls, plastic drylining (with lugs) or may be installed into surface mounting Dado- type trunking systems using the appropriate fixings. - Page 4 The Stereo 3.5mm Jack Input has a signal-operated priority over the 3 pin screw connector. 3 illuminated buttons allow basic control of the CLB-AVID. The right hand button ( ) controls the ON/OFF function and the selection of which input channel is used;...
- Page 5 CLB-BLUETOOTH: Wireless Bluetooth connectivity can be provided via a separate Receiver Module (CLB-BLUETOOTH sold separately) allowing any Bluetooth enabled device using A2DP profile to be paired with the CLB-AVID. A blue LED provides indication of the Bluetooth function. As follows:...
- Page 6 Screw terminal connections for Power, Wired Input, Loudspeaker Outputs and Line Level outputs are located on the rear PCB of the CLB-AVID. Power is provided via the PSU (included); its cable being marked with a white line on the positive (+) core which connects to the V+ terminal, the plain black core is negative (-) which connects to the G terminal.
- Page 7 Low level signals such as headphone output levels can sometimes not provide enough output signal level to keep the internal priority switching circuit built into the CLB-AVID open, this may result in loss or intermittent playback of the audio being broadcast.
- Page 8 1. Insert the reducing module into the faceplate 2. Clip the front panel-facia of the CLB-AVID into the reducing module. 3. Carefully offer up the CLB-AVID PCB to the rear of the front panel-facia, being careful not to damage or break the PCB or compartments..
- Page 9 4. If chosen, insert the CLB-Bluetooth Module into the Faceplate, adjacent to the CLB-AVID. 5. Connect the two Modules together with the connecting cable supplied with the CLB-Bluetooth Module. 6. An additional Conec2 AV Module of your choice (such as VGA,...
- Page 10 IR Remote Control Function: Power On/Off Volume Level Control Audio Source Channel Selection Using the supplied IR Remote Control will provide wireless control of the CLB-AVID’s volume level and Audio Source channel selection.
- Page 11 Conec2 ‘Pick-and-Click’ Modular AV Faceplates For details of the full range of Conec2 Modular AV Faceplate products, visit us online today at...
- Page 12 CIE-Group Ltd Widdowson Close Blenheim Ind Est Bulwell Nottingham NG6 8WB England T: +44(0)115 9770075 F: +44(0)115 9770081 E: info@cie-group.com W: www.cie-group.com CIE-Group...