GE GEK-36150 terminet 300 Operator's Manual page 56

cp
-
m
CODE
LF
VT or
FF
(Note 4)
BS
ESC H
2J Out
on TRP/3
ESC H
2J In
on TRP/3
(Note
5)
ESC J
Received
DC2
DC3
TIME DELAY AND FILL CHARACTER CHART
FOR USING THE TCA (A3 MODEL) WITH THE TermiNet 1200 PRINTER
MOTOR ON
l
MOTOR ON
!
MOTOR ON MOTOR ON
MOTOR OFF
MOTOR OFF
MOTOR OFF MOTOR OFF
KEYBOARD
KEYBOARD
DATA
10 CPS DATA
1
30 CPS DATA 120 CPS DATA
DATA
10 CPS DATA
30 CPS DATA
120 CPS DATA
. None (Note 1) (Note 6)
Min. 24 msec None None (Note 2) 24 msec.
Printer Req.
Min. - 24
Max. Printer
24 msec.
msec. Req.
Max.
-
Printer Req.
(Note 3)
Min.
-
2 fills Min.
-
24 Min. - 24 msec. 2 Fills 2 Fills 24 msec.
24 msec. plus
2 Fills Max.
-
Printer msec. plus plus
2
fills.
plus 2 fills 2 fills
Req. 2 fills. Max.
-
Printer
Max. -
Req.
Printer Req.
None Printer Req. Min. - 24 Min.
-
24 msec. None None
24 msec. 24 msec.
msec. Max. - Printer
Max. - Req.
Printer Req.
None
Printer Req. Printer Req. Printer Req. None None
24 msec. 24 msec.
16 fills 16. fills 24 msec. Min.
-
24 msec. 16 fills 16 fills 24 msec. 24 msec.
plus 16 plus 16 fills.
plus 16 plus 16
fills Max. - Printer fills. fills.
Req.
None
None 24 msec. 24 msec. None None 24 msec. 24 msec.
N/A
(Note 6) 300 msec. 300 msec. N/A 300 msec. 300 msec. 300 msec.
300 msec.
None
None 24 msec. 24 msec. None
!None
24 msec.
24 msec.
~:ter
Req. refers to the fill characters which are required by the Printer.
2. When delay time is referenced, either delay time or fill characters may be used. In Transparency, Fill Characters must be used.
3. When fill characters are referenced, fill characters must
be
used. Delay time !I!!!Y
!lQ1
be
substituted.
4. A single backspace must
be
accomplished by BS, BS, Space to ensure the proper dilay when the data is played back. The
fill characters indicated are required after each of those BS codes.
5. The fill characters listed for ESC J are. required by the TCA after the code. Fill characters are also required by the Printer
before the code when the motor is on.
6. 24 msec at 30 cps
=
1 "fill", at 120 cps
=
3 "fills"; 300 msec at 10 cps
=
3 "fills", at 30 cps
=
9 "fills", at 120 cps
=
36 "fills".