Lincoln Electric LINCOLN WELDING ARMS IM886 Operator's Manual page 20

C-4
K1779-7
Dual Gas Cylinder Holder Kit
(See Figure C.6)
Mounts directly to the stanchion.
chains and hardware.
WARNING
• If the Dual Gas Cylinder Holder Kit is installed to
a Lift Truck Platform, the gas bottles must be
removed before the platform is lifted or moved.
• Do not remove the 180° travel stops from the
arm if both the Dual Gas Cylinder Holder Kit and
the Wire Spindle Mounting Kit are mounted to
the arm. If the travel stops are removed, the
wire spools may impact the gas cylinders.
------------------------------------------------------------------------
1. Mount the chain holder bracket to the welding arm
stanchion.
2. Secure the bottle ring holder to either the lift truck
platform (if present) or directly to the floor.
3. Use the leveling bolts as necessary to correct for
uneven floors.
Chain Holder
ACCESSORIES
Includes bracket,
FIGURE C.6
Holder
Bracket
Bottle Ring
Holder
WELDING ARMS
K1779-8
Wire Spindle Mounting Bracket
(See Figure C.7)
Bracket for mounting the mast and spindle at a lower,
more convenient height.
Includes bracket and mounting hardware for mounting
the mast and spindle from a bench feeder or K1524-1
Universal Wire Reel stand. Mast and spindle not
included with K1779-8 Wire Spindle Mounting
Bracket.
• Do not remove the 180° travel stops from the
arm if both the dual gas cylinder kit and the wire
spindle mounting kit are mounted to the arm. If
the travel stops are removed, the wire spools
may impact the gas cylinders.
------------------------------------------------------------------------
Chain Holder
Bracket
Leveling Bolts
WARNING
FIGURE C.7)
C-4