petrek ipet User Manual

1. Please make sure that
minutes before setup.
Go to www.pettrackingoz.com.au
2. Turning on power:
ON: Press the Power Key for 5 seconds
All LED's will light up together
OFF: Press the Power Key for 5 seconds
LED's will go off in a sequence
If no lights are seen during the on or off sequence,
the device might be out of power or not fully charged.
NOTE: All units supplied in Australia already come with a pre-loaded Telstra SIM card so there is no need to remove the
back cover and insert a SIM card unless you would prefer to use a SIM card from a Telco provider other than Telstra
3. Charging your Petrek GPS
When charging, the red LED will stay solid. When fully charged after 30-40 minutes the red LED
USB Adaptor
will go off.
charging kit.
4. Pull the collar through the universal collar adaptor
5. Match the arrows on the back of the device and the collar adaptor.
Turn anti-clockwise to lock, clockwise to unlock
6. Apply the silicon bands to reduce risk of the Petrek GPS
for further information
We recommend that you
the tracker is charged for 30
LED Indicator:
Red=Power Blue=GPS
Power Key
only use our provided USB
Green = GPRS