Getting Started; Welcome; Installation - Cabletech URZ0188 Installation And User Manual

GETTING STARTED

Welcome

If you use the STB for the first time, the "Welcome" menu appears.
Press cursor button to setup the Region, Language, Display Mode
and Aspect Mode.
Highlight "OK" and press the "OK" button to start channel search.

Installation

Press the "MENU" button to enter main menu.
1
Press "UP"or " DOWN " button to highlight "Installation", press
2
"RIGHT" button to enter the Installation menu.
3 Press "UP" or "DOWN" cursor button to highlight the desired item
and press "OK"button to enter the sub-menu .
4 Press "EXIT" button to exit.
Auto Scan
1 Select the "Auto Scan", press "OK" button to enter the Auto Scan menu.
2 Press the cursor button to set "FTA Only", then highlight "Search",
press the "OK" button to start auto scan .
Channel Scan
Select "Channel Scan", press the "OK" button to enter the Channel
1
Scan menu.
Press cursor button to set Scan mode, Scan Band ,
2
Channel No., Frequency and Bandwidth, then highlight "Search",
press "OK" button to start channel scan .
Aerial Adjustment
Select the "Aerial Adjustment", press"OK" to enter the Aerial
1
Adjustment.
Press the cursor button to set the desired setting.
2
LCN
If LCN(Logical Channel Number) Select function is activated, you can't change the original
number of TV channels by scanning .
You can activate/disactivate the LCN function by setting the "LCN Mode" to on/off.
Channel Scan mode:
By channel
By frequency
31
English
Welcome
Region Poland
Language English
Display Mode 1080i
Aspect Mode
Auto
OK
Installation
Auto Scan
Channel Scan
Aerial Adjustment
LCN
Auto Scan
FTA Only No
Search
Channel Scan
Scan Mode By channel
Scan Band UHF
Ch No. CH37(666000KHz)
Frequency 666000KHz
Bandwidth 8MHz
Search
Signal Intensity 81%
Signal Quality 97%
Aerial Adjustment
Ch No. CH37(666000KHz)
Signal Intensity 81%
Signal Quality 97%