DStv 5-2 User Manual page 12

Connecting the DStv Switch (5-2) to one
DStv Explora and one to four Single View Decoders
Use any
one of the
outputs.
• Once the switch has been connected to the satellite dish,
• Then connect the outputs labelled 1 to 4 on the switch to the
10
H/L V/L
1 2
use the supplied cable and connect output A or B on the
switch to the input labelled UNICABLE™ IN on the back of
your DStv Explora.
satellite inputs on the back of the Single View Decoder(s).
H/H V/H
A
B
3 4
Single View Decoder(s)
DStv Explora
DStv Switch - User Guide