Toshiba XDE600KU Owner's Manual page 33

Upconverting 1080p extended detail dvd player
Hide thumbs Also See for XDE600KU:
Table of Contents

Advertisement

Downloaded From Disc-Player.com Toshiba Manuals
Sharp: Select this to make the picture sharper.
Color: Select this to make the picture sharper with
enhanced color.
Contrast: Select this to make the picture sharper with
bigger contrast.
Off: Select this to follow the original picture setting.
Aspect Ratio
Video out
HDMI Resolution
JPEG Interval
Picture Modes
Notes
• Picture Modes is only available when the Video out is set to
"HDMI" and outputs via HDMI.
• If HDMI resolution is set to 480p or 720p, the Picture Modes
cannot be activated.
Audio
Digital Output
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press
/
button to select Audio.
3) Press
button, then use the
/
Digital Output.
4) Press ENTER button, then use the
/
the output sound format (Off, PCM or Bitstream).
5) P r e s s E N T E R
button.
6) P r e s s S E T U P
button to exit the
menu.
PCM: Select when
connected to a Multi-
channel digital stereo
amplifier. The DVD
player outputs sound
in the PCM stereo
format when you play a DVD recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
Bitstream: Disc audio raw data will be output. Select
"Bitstream" if your amplifi er supports "DTS".
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select "PCM" or "Bitstream".
• If this DVD player is connected to a TV using HDMI,
make sure to select "PCM".
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
: 16 : 9
2) Press
/
button to select Audio.
: Auto Fit
3) Press
button, then use the
: HDMI
Mode.
Sharp
4) Press ENTER button, then use the
Color
On or Off mode.
Contrast
5) Press ENTER button.
Off
6) Press SETUP button to exit the menu.
: PCM
: Off
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
Rating
button to select
button to select
Parental control
DVDs equipped with the password function are rated according to
Off
their content. The contents allowed by a parental lock level and the
PCM
way a DVD can be controlled may vary from disc to disc.
Bitstream
For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable
scenes, or you could lock out playback of the disc altogether.
• DVDs may or may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this function
works with your DVDs.
1) Press SETUP button.
2) Press
/
select Rating.
3) Press
button to
select Parental
c o n t r o l , t h e n
p r e s s E N T E R
button.
"Enter Password"
s c r e e n
w i l l
appear.
DVD
/
button to select Night
/
button to select
: PCM
Off
On
Parental control
: 8. Adult
Set Password
DVD
to
Parental control
: 8. Adult
Set Password
Enter Password:
33

Advertisement

Table of Contents
loading

Table of Contents