Goldmund EIDOS 36U User Manual page 10

6 BACK PANEL CABLE CONNECTIONS (Ctd.)
Analog connection: Connecting to a Receiver/Amplifier in
Analog 7.1/5.1 multichannel
Please use 8 interconnect cables to connect the FRONT-L (Front Left), FRONT-R
(Front Right), SURR-L (Surround Left), SURR-R (Surround Right), Center, SUB
(Subwoofer), REAR-L (Surround Back Left) and REAR-R (Surround Back Right),
analog output terminals of the Eidos 36U to the corresponding multi-channel analog
audio input of your A/V receiver or amplifier. If the A/V receiver or amplifier only has
5.1ch audio input, the REAR-L (Surround Back Left) and REAR-R (Surround Back
Right) terminals do not need to be connected. Goldmund recommends using a
Goldmund Interco cable.
Connecting to a Stereo Audio System
If your audio system only offers stereo audio inputs, or if you would like to connect a
dedicated stereo system in addition to the surround system, you can connect it to the
FRONT-L & FRONT-R audio output terminals of the player.
NOTE
The STEREO AUDIO OUT terminals will always provide a down-mixed stereo signal
from multi-channel sources. The "Down Mix" and other speaker settings in the Audio
Processing Setup Menu do not affect the STEREO AUDIO OUT.
10
GOLDMUND EIDOS 36U – Universal Player -