Specifications - LG 50PB65 Service Manual

NOTE
: Specifications and others are subject to change without notice for improvement.
Application Range
V
This spec is applied to the 50" PLASMA TV used PD73A Chassis.
Chassis
PD73A
Specification
V
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
Test Method
V
1) Performance : LGE TV test method followed.
2) Demanded other specification
Safety : CE, IEC specification
EMC : CE, IEC
Model
50PB65-ZA
General Specification
V
1. Module Specification ( 50" WXGA MODULE )
No
1 Display Screen Device
2 Aspect Ratio
3 PDP Module
4 Operating Environment
5 Storage Environment
6 Input Voltage
Copyright©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes

SPECIFICATIONS

Model Name
50PB65-ZA UK, German, Italy, France, Sweden, Finland, Spain
Market
UK, German, Italy, France, Sweden, Finland, Spain
Item
50" Wide Color Display Module
16:9
PDP50X4,
RGB Closed Type, Film Filter
1)Temp.
2)Humidity : 20~80%
3)Temp.
4)Humidity : 10~90%
100-240V~, 50/60Hz
Market
Safety : IEC/EN60065
EMI
EMS : EN55020
Specification
: 0~40deg
: -20~60deg
- 4 -
Brand
LG
Appliance
: EN55013
Remark
Plasma Display Panel
LGE SPEC.
Maker LG/Sanken
LGE Internal Use Only
Remark
Remark
TEST