Limited Warranty: The APU-RS8E is designed to operate reliably for many years. Correctly installed and operated in accordance with these instructions, Amina war- ranties the APU-RS8E against defective materials and workmanship for a period of 1 year.
Page 3
The jumpers for each channel are positioned as indicated in the diagram below. Diagram 1: Internal circuit board layout of APU-RS8E Important: Ensure that the jumpers are fully pushed down onto the pins.
Page 4
Connecting the APU-RS8E 2 Channel example writing schematic: iQ Series or iQ Series or Evolution Evolution Series Series Loudspeaker Loudspeaker Diagram 2 Note: In this example the red levers (shown as light grey in the diagram) on the Springcon ® plugs are used for the “+”...
Page 5
Positioning the APU-RS8E The APU-RS8E is designed to fit into a standard 19 inch equipment rack via 4 mounting holes and has a height of 1U (45mm/1.75 inches). Diagram 4: APU-RS8E front panel Diagram 5: APU-RS8E fixing points detail Alternatively, the APU-RS8E can the placed on a shelf.
• It is not recommended that you intentionally cause the APU-RS8E to automatically protect the loudspeakers by deliberately over-driving them • If you find that the APU-RS8E automatically reduces the audio volume from the loudspeakers frequently it may suggest that the amplifier being used is too powerful or that the layer of plaster over the speakers is too thick.
Page 7
At the end of its useful life it should be returned to the manufacturer for recycling according to the European Union’s WEEE directive. All products are subject to change without notification. E&OE Amina Technologies Ltd Cirrus House, Glebe Road, Huntingdon, Cambridgeshire...
Need help?
Do you have a question about the APU-RS8E and is the answer not in the manual?
Questions and answers