Cocktail Audio BF-11 Quick Start Manual

Wireless Stereo Speakers
Main features
●
Bluetooth 4.0 based aptX® audio streaming
●
DLNA/UPNP/DMR based audio streaming
●
Wi-Fi based network audio streaming
●
Auxiliary audio source
2
Hardware Connection
Connect the power adapter to the speaker as shown below
Power adapter
After connecting the mains, the LED will turn from red to green in
about 20 seconds, else touch the interface to switch from red to
green.
Touch Interface Working /Active Status
Power LED ON/OFF Green/Red
Bluetooth/AUX/Wi-Fi LED Per Indicator
Mode Switching LED White
Volume Up LED White
Volume Down LED White
1
Appearance and Functions
Rear view
3 2 1
1. Power input 2. AUX input 3. Multifunction key
Function keys:
o In Bluetooth mode, press the multifunction key to launch
a new pairing device.
o In Wi-Fi Station mode, press the multifunction key to
launch WPS/QSS pairing.
In Wi-Fi mode, press and hold the multifunction key for
o
2～3 seconds to switch between AP mode and Station
mode
3
AUX Connection Mode
Playing music via 3.5 audio cable from smart phones or other devices
Connect a mobile phone (or a PC or other devices) to the
speaker via a 3.5 audio cable - as shown below.
3.5audio cable
Touch the interface key to activate the (AUX) mode
The output will be heard from the speaker when music is
played from the source device.
★
Tip: Ensure both ends are properly inserted into the jack port.
Top view
K1 K2 K3 K4
L1 L5 L6 L7
L2 L3 L4
Touch Key (K1~K4)
K1 (ON/Standby): Touch this interface when the device is in standby to
turn it ON.
(Hold for 1 second when the device is ON for standby mode)
K2: Mode switching interface, touch and hold for 1 second to select
Bluetooth, AUX IN or Wi-Fi audio source.
K3/K4: Touch these interfaces (for a few seconds) to regulate the volume
4
Bluetooth Connection Mode
Playing audio files via Bluetooth from a smart phones/other devices
Touch the interface
key to activate the
(Bluetooth) mode.
An inert Bluetooth indicator
means the connection is
successful.
★
Tip: Bluetooth pairing is only done once – the BF-11 will automatically connect next time.
LEDs (L1~L7)
L1: ON/OFF indicator: red indicates that the device is ON;
blinking red is standby and green means working mode.
L2: Bluetooth status indicator: When it is ON, it indicates that
the Bluetooth connection is operating properly. Slow blinking
means a new Bluetooth connection is being set-up and a rapid
blinking, means an automatic pairing/searching of a
previously paired connection is in motion.
L3: AUX status indicator: The AUX IN mode is selected.
L4: Wi-Fi status indicators: WHITE indicates Station mode,
GREEN indicates AP mode (Access Point).
In Station mode, when the indicator blinks slowly, it means a
new WPS/QSS device pairing is in motion. When it blinks
faster, it means the device is searching for a previously
connected device and ON (permanently lit), means the Wi-Fi
mode is working properly.
L5: Touch user interface - The indicator blinks at each touch
or mode switch.
L6: Light volume up - The indicator blinks at each touch.
(Bright light means that the volume is at its maximum level)
L7: Light volume down - The indicator blinks at each touch.
(Bright light means that the volume is at its minimum level)
Press the multifunction Key
Enable the Bluetooth function on
and the Bluetooth indicator
your mobile device and search for
will start blinking slowly.
the Bluetooth ID of the speaker.
An audio from the source
★
Tip: The Bluetooth name of the speaker is
device can now be played
DABA which is printed on a label at the base
through the BF-11
of the speaker (password 0000) by default.