Table of Contents
Advertisement
Quick Links
Thank you for purchasing the Blink Portable WiFi.
This WiFi device provides you with a high speed wireless network
connection.
This document will help you understand your Blink Portable WiFi so you can start using it right away.
Please read this document carefully before using your Blink Portable WiFi.
For detailed information about the functions and configurations of the Blink Portable WiFi, refer to the
online help section on the Web Management page that comes with the Blink Portable WiFi.
For detailed instructions to login to the Web Management page, refer to "Logging in to the Web
Management page".
Getting to know your Blink Portable WiFi
Appearance
Signal indicator
Wi-Fi indicator
Battery indicator
SMS indicator
Power button
Strap hole
Micro USB port
Indicator
Indicator
Signal
Wi-Fi
Battery
Messages
SSID and wireless network encryption key
When a WiFi device establishes a connection to the Blink Portable WiFi for the first time, you may need
to enter the default Service Set Identifier (SSID) and wireless network encryption key.
These are printed on the Blink Portable WiFi label.
It is recommended that you can log in to the Web Management page and change your SSID and
wireless network encryption key.
Getting started
Installing a SIM card and the battery
Caution:
Use a standard SIM card compatible with the Blink Portable WiFi;
otherwise you will damage your Blink Portable WiFi.
Install the SIM card and the battery according to the illustration.
Installing and removing the microSD Card
Install and remove the microSD card according to the illustration.
Note:
The microSD card is an optional accessory. If no microSD card is included in the package, you can
purchase one separately.
Status
Description
Green
Strong signal
Orange
Weak signal
Red
No signal
Green
Wi-Fi turned on
Green
Sufficient battery
Blinking green
Charging the battery
Red
Low battery
Green
New message
Blinking green
Inbox full
Advertisement
Table of Contents
Related Manuals for Blink e5251
Summary of Contents for Blink e5251
-
Page 1: Getting Started
Inbox full SSID and wireless network encryption key When a WiFi device establishes a connection to the Blink Portable WiFi for the first time, you may need to enter the default Service Set Identifier (SSID) and wireless network encryption key. - Page 2 Charging the battery If the Blink Portable WiFi has not been used for a long time, or if the battery is fully depleted, the Blink Portable WiFi may not power on immediately after the charger is plugged in. Please charge the battery for a while before attempting to power on the Blink Portable WiFi.
- Page 3 Tips When the Blink Portable WiFi is in use for an extended period of time, it will become warm and may overheat. Should this happen, the Blink Portable WiFi will automatically close the network connection and turn off to protect itself from damage. If this occurs, place the Blink Portable WiFi in a well ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal.
Need help?
Do you have a question about the e5251 and is the answer not in the manual?
Questions and answers