Wamup TSTAT User Manual

Floor or setting
temperature
To set the day
To set the hour
To set the
minutes
To set the
programming
To erase
a program
To selet the
operating mode
Heating
indicator

OPERATING MODES

The TSTAT thermostat has three (3) operating modes.
Manual ( )
This mode allows you to maintain a constant floor temperature.
1-To activate this mode, press on Mode button to display the
2-Set the desired temperature using the
grammed or or settings.
AUTOmatic ( )
This mode executes your own programming schedule.
To activate this mode, press on Mode button to display the
icon indicates which temperature setting is used. Also, the icon of the program
number will be shown.
Holiday (
)
This mode sets your thermostat to your specified holiday temperature.
You can switch to the holiday setting for a prolonged absence by pressing
on . The display will show icon. The temperature will remain at this setting
until you return to normal operating mode by pushing the Mode button.
If you wish to immediately return to the programmed settings, press on Mode
button twice.

SPECIAL FUNCTIONS

Memory back-up
In the event of a power failure, an internal circuit will maintain the programming
and the time. The time would have to be reset if the power failure exceeds 6
hours.
Early start function
The thermostat is provided with a built-in function enabling it to calculate the opti-
mum time to start the heating system to achieve the desired temperature set-
ting at the programmed time. This function could start the heating system as
early as 6 hours prior to the programmed time. To enable this function, set the
switch E.S. to "ON" inside of the thermostat.
IF YOU HAVE ANY QUESTIONS REGARDING THE INSTALLATION OR
SETTING OF YOUR WARMUP TSTAT THERMOSTAT, PLEASE CALL
THE HELPLINE ON:
0845 345 2288
OR EMAIL WARMUP: technical@warmup.co.uk
Time and day
of the week
Pre-programmed
settings
Program
number
icon.
buttons or select the pre-pro-
icon. The
PROGRAMMING OF AUTOmatic
STEP 1 - Programming the time and day
1-Set the time using the Hour and Min buttons.
2-Set the day using the Day button.
STEP 2 - Programming the Comfort, Economic and Vacation settings
The Comfort
setting
sent the temperatures that you wish to have during the day
while you are away at work
period .
Comfort
STEP 2 (cont'd)
a) To program the Comfort temperature, select the desired setpoint using the
Economic
(app. 3 seconds).
b) To program the Economic temperature, select the desired setpoint using
Vacation the
(app. 3 seconds).
c) To program the Vacation temperature, select the desired setpoint using
the
the
d) Press the Mode button to exit this function and return to the normal oper-
Up and down
ating mode.
to adjust the
temperature
STEP 3 - Programming Your Schedule
The TH132-F allows 4 setting changes for each day of the week. There are no
pre-set programs. The programs are tailored to perfectly adapt to your life style.
The principle is very simple. For each day, enter the time at which you wake up
(P1), the time you leave for work (P2), the time you arrive back home (P3) and
the time you go to bed (P4).
Program
a) To Program your Schedule
or
1-Press on PGM button to access the programming mode.
2-Press on Day button to select the day to be programmed. You can select all
days of the week by pressing on Day button for 3 seconds.
You may find it easier to set the schedule the same for all days first and then change
those days with a different schedule (ex. Saturday, Sunday) afterwards.
3-Press on PGM button to select program 1, 2, 3 or 4.
4-Press on Hour and Min buttons to program the time.
5-When you have completed your programming, press on Mode button to exit
this function.
b) Example 1 :
1-Press on PGM button to access the programming mode.
2-Press on Day button 3 seconds to select every day of the week.
3-Press on Hour button to enter 7:00 AM, Prog. 1 (
4-Press on PGM button again to select Prog. 2 (
button to enter 9:00 AM.
5-Press on PGM button again to select Prog. 3 (
Min buttons to enter 4:30 PM.
6-Press on PGM button again to select Prog. 4 (
Min buttons to enter 10:30 PM.
7-Press on Mode button to exit this function.
c) To Erase a Program :
Select the program using PGM and Day buttons, and press on Clear button.
The time field displays -:- when the program is inactive.
Temporary temperature bypass
This operation allows you to temporarily modify the floor temperature while you
are in the Automatic mode. Simply press on
desired temperature, or the
tings you have programmed. This temperature will be maintained until the
beginning of the next programmed schedule.
, Economic and Vacation
, or while you are away for an extended
buttons and press the button until the
buttons and press the button until the
buttons and press on the button simultaneously until
icon is displayed (app. 3 seconds).
Mode
Comfort period from 7:00 AM to 9:00 AM
Economy period from 9:00 AM to 4:30 PM
Comfort period from 4:30 PM to 10:30 PM
Economy period from 10:30 PM to 7:00 AM
Identical schedule for all days of the week.
or
or button to select the Comfort or Econo set-
MODE
( )
settings respectively repre-
, at night or
icon is displayed
icon is displayed
Time
Wake-up time
Leaving time
Return time
Bed time
).
), and press on Hour
), and press on Hour and
), and press on Hour and
buttons to select the