Sony PMW-F55 Operating Instructions Manual page 75

Audio
Menu items Sub items and setting values Contents
Audio CH4 Level
(Only when the CBK-55BK is
attached)
Side4 / Front / Front+Side4
Audio Level CH-1 Audio Select
Auto / Manual
Setting for audio
recording level
CH-2 Audio Select
Auto / Manual
Notes
CH-1 Audio Level
• This item cannot
–99 to +99 (±0)
be selected when
CH-2 Audio Level
removing the
–99 to +99 (±0)
audio connector
panel.
AGC Spec
• The recording
–6dB / –9dB / –12dB /
level for the
–15dB / –17dB
channel that the
CH1&2 AGC Mode
AES/EBU signal
Mono / Stereo
is selected is
locked.
CH3&4 AGC Mode
(Only when the CBK-55BK is
attached)
Mono / Stereo
Reference Level
(Only when the CBK-55BK is
attached)
–20dB / –18dB / –16dB /
–12dB / EBUL
Audio Output Output CH
CH-1/CH-2
Setting for audio
CH-3/CH-4
outputs
Monitor CH
When "Output CH" is set to
"CH1/CH2"
CH-1/CH-2
CH-1
CH-2
When "Output CH" is set to
"CH3/CH4"
CH-3/CH-4
CH-3
CH-4
Headphone Out
Mono / Stereo
Monitor Level
0 to 99
Select the knob for adjusting the audio level of sound
recorded to channel 4.
Side4: LEVEL CH-4 knob on the audio operating section
Front: MIC LEVEL knob on the operating section (front)
Front+Side4: LEVEL CH-4 knob and MIC LEVEL knob
(interlocked)
The audio recording level is adjusted automatically when you
set to "Auto."
The audio recording level is adjusted automatically when you
set to "Auto."
Adjusts the audio recording level when "CH-1 Audio Select"
is set to "Manual."
Adjusts the audio recording level when "CH-2 Audio Select"
is set to "Manual."
Selects the AGC level.
Selects auto adjusting method for the input level of an analog
audio signal recorded to CH-1/CH-2 from "Mono" (performs
for each channel) and "Stereo" (performs in stereo mode).
Selects auto adjusting method for the input level of an analog
audio signal recorded to CH-3/CH-4 from "Mono" (performs
for each channel) and "Stereo" (performs in stereo mode).
Sets the reference output level for 1 kHz test signal.
Selects audio output channels from either channels 1 and 2 or
channels 3 and 4.
Note
This item cannot be set when the CBK-55BK is attached.
Selects the audio channel(s) to be fed to the headphones and
the built-in speaker.
CH-1/CH-2 (CH-3/CH-4): Stereo
CH-1 (CH-3): CH-1 (CH-3) only
CH-2 (CH-4): CH-2 (CH-4) only
Note
This item cannot be set when the CBK-55BK is attached.
Selects the headphones output, "Mono" or "Stereo."
Adjusts the monitor level.
Note
This item cannot be set when the CBK-55BK is attached.
Setup Menu List 75