Table of Contents
Advertisement
•
Connect - To connect to a wireless network using a specific profile, select
the profile, and click the Connect button. If the wireless network has WEP
encryption enabled, you will see the screen shown in Figure 5-7.
In the WEP drop-down box, select the type of WEP encryption used by the
wireless network: 64-bit or 128-bit WEP.
If the wireless network uses a passphrase, enter the passphrase in the
Passphrase field. If the wireless network uses a WEP key, enter the WEP
key in the Key 1
field.
Click the OK but-
ton to complete the
network connection
and return to the
Profiles screen, or
click the Cancel
button to cancel the
network connection
and return to the
Profiles screen.
16
Network Everywhere
Figure 5-6
Figure 5-7
Series
Wireless Notebook Adapter
™
•
Edit - Select a profile, and click the Edit button to change an existing pro-
file.
•
New - Click the New button to create a new profile. See the next section,
"Creating a New Profile."
•
Import - (Shown in
Figure 5-8.) Click
the Import button
to import a profile
that has been saved
in another location.
Select the appropri-
ate file, and click
the Open button.
•
Export - (Shown in
Figure 5-9.) Select the
profile you want to save
in a different location,
and click the Export
button. Direct Windows
to the appropriate fold-
er, and click the OK
button.
•
Delete - Click the Delete button to delete a profile.
Click the X (Close) button in the upper right corner to exit the WLAN Monitor.
Note: If you want to export more than one profile, you have to export
them one at a time.
Figure 5-8
Figure 5-9
17
Advertisement
Table of Contents
