Page 2
Contents A Presentair™ Bluetooth® Presenter Remote B Carrying Pouch C USB Charging Cable* D Instruction Guide * Charging function only, no USB data function...
Page 3
Components E Front LED/Low Battery Indicator Light F Up Button G Left Button H Down Button Right Button Reset Button K MicroUSB Charging Connector Stylus Tip M Rear LED/Charging Indicator Light N On/Off Switch/Bluetooth Connection Button O Laser Warning Statement...
Page 4
Getting Started Charge your Presentair Bluetooth Presenter Remote on any USB port or charging adapter for 2 hours before initial use or when the front LED blinks yellow, indicating the battery is low. NOTE: This device has USB charging function only, and will...
Page 5
Widcomm Microsoft Press and hold power button on Presentair 3-6 seconds from Off to enter pairing mode. Rear Blue LED will blink until paired. Double-click located at the bottom of the screen.
Page 6
Select My device is set up and ready to be found and click Next. The indicator light blinks blue. Select the Kensington Device (Appears as a mouse) on your computer screen, and then click Next. Select the mouse on your computer screen, and then click Next.
Page 7
Select Don’t use a passkey and click Next. Click Finish.
Page 8
Press and hold power button on Presentair 3-6 seconds from Off to enter pairing mode. Rear Blue LED will blink until paired. Click located in the top-left corner of the screen. Click System Preferences, then click Click Set Up New Devices.
Page 9
Select Mouse from the device list, and click Continue. The indicator light on the mouse blinks blue. Kensington Device (Appears as a mouse) appears on your computer screen. Click Continue.
Page 10
On the Conclusion screen, click Quit. 30' (10m) max.
Page 11
Power Button and Rear LED Functions LED Color Action Explanation and Behavior Press, hold, Turns on LED glows and release power blue Power Button from Press and Turns on LED blinks hold Power power blue until Button 3–6 and enters paired to a seconds pairing mode...
Page 12
Web Support You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Website: www.support.kensington.com. Telephone Support There is no charge for technical support except long-distance charges where applicable.
Page 13
FCC regulations and must not be made. SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment using a Kensington input device should be made using only the shielded cables. FCC DECLARATION OF CONFORMITY COMPLIANCE STATEMENT This product complies with Part 15 of the FCC rules.
Page 14
• Do not dispose of your Presentair as ordinary refuse, as it contains a lithium-polymer battery. Consult your local municipal or civil authority for instructions on correctly disposing of a lithium- polymer battery. • In the USA and Canada: This mark indicates your Presentair can be recycled by the Rechargeable Battery Recovery Corporation...
Page 15
Kensington and the ACCO name and design are registered trademarks of ACCO Brands. The Kensington Promise is a service mark of ACCO Brands. Presentair is a trademark of ACCO Brands. All other registered and unregistered trademarks are the property of their respective owners.
Page 16
Complete warranty terms are available at: www.warranty.kensington.com Kensington Computer Products Group A Division of ACCO Brands 333 Twin Dolphin Drive, Sixth floor Redwood Shores, CA 94065 ACCO Australia ACCO Brands Europe Level 2, 8 Lord St Oxford Road Botany NSW 2019...
Need help?
Do you have a question about the Presentair and is the answer not in the manual?
Questions and answers