Page 1
Africa Iso-Tech Instruction Manual 1 & 2 Indianapolis Street Kyalami Business Park 300XP Kyalami, Midrand, South Africa Portable Thermal Printer Asia Iso-Tech 460 Alexandra Road, #15-01A PSA Building Singapore 119963 Europe Iso-Tech PO Box 99 Corby Northamptonshire NN17 9RS United Kingdom...
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN Specifications Printer Description 6.1 Printing Mechanical specifications Method: Thermal Dot-matrix Printing Dot per Line: 8 (Vertical) x 166 (Horizontal) Fonts: 5 x 7 and 10 x 15 Dot Pitch: 0.35mm (Vertical), 0.28mm (Horizontal) Character Size: 1.4 x 2.4mm (5x7), 2.8 x 4.6mm (10x15) Characters per Line:...
Page 4
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN Decimal Hexadecimal Octal ASCII ± ÷ 9. Printer upper cover. 10. Printer base. 11. Battery cover. 12. Paper cover. 13. Paper exit: Printed paper will emerge from this exit and can be torn off against the serrated cutting edge.
(for connection to ISO-TECH instruments) 2.1.1 ISO-TECH IPM3005 Flexible Power Quality Tester 1. Ensure the 300XP printer is turned off. 2. Set the DIP switch of the printer SW1 to ON. 3. Connect the OP cable of the printer to the optical port on the host instrument (Refer to the instructions for the host instrument for further information).
Decimal Hexadecimal Octal ASCII 1. Ensure the 300XP printer is turned off. (spare) 2. Set the DIP switch of the printer: SW1 to ON. (spare) 3. Connect the OP cable of the printer to the optical port on the host instrument (Refer (spare) to the instructions for the host instrument for further information).
Hexadecimal Octal ASCII 1. Ensure the 300XP printer is turned off. 2. Set the DIP switch of the printer: SW1 to ON. 3. Connect the OP cable of the printer to the optical port on the host instrument (Refer to the instructions for the host instrument for further information).
ASCII 2.2.1 AVM-09 Anemometer 1. Ensure the 300XP printer and AVM-09 Anemometer are turned off. 2. Set the dip switches of the printer: SW1 to OFF and SW2 to ON. 3. Connect the RS232 cable to the anemometer and the printer.
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN 2.3 To Connect with Agilent® 34401A > 2.3.1 Setting Agilent® 34401A Enter the Agilent 34401A MENU: then Press to enter MENU. press Enter E: I/O MENU to go to E: I/O MENU – Press to enter.
Page 10
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN Note: Appendix IV ASCII Code Tables Agilent is a trade mark of Agilent Technologies. There are 199 fonts for printing selection. Decimal Hexadecimal Octal ASCII (space) " & < Decimal Hexadecimal Octal ASCII 05/20/2010 Version No.1.0 EN-25...
2.3.2 To Connect with Agilent® 34401A Multi-meter Appendix III RS-232 Pin Connections 1. Ensure the 300XP printer and Agilent 34401A multimeter are turned off. 2. Set the dip switches of the printer: SW1 to OFF and SW2 to ON. 3. Connect the RS232 cable to the multimeter and the printer.
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN 2.3.3 Agilent Buttons Description Appendix II Coding of Graphics Printing Select the setting sub-functions, or change the settings. Enter the setting sub-functions, or change the settings. Save the settings. Select the setting sub-functions, or change the settings. Exit the setting sub-functions, or change the settings.
(16) Inquiry of how many bytes left 6 09 (16) to be printed 1. Ensure the 300XP printer is turned off. 7 0A Line-feed (Skip a line) (16) 2. To select the contrast: Press and hold the following button(s) for 1 second while turning the printer power Remark: 1.
ISO-TECH Instruments. 4. Click on the Send button to finish the setting. RS232: use the RS232 port/cable of the 300XP printer to connect to a PC, Agilent 34401A multimeter and some models of RS instruments.
Page 15
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN 2. Preview the graphics file under Picture preview. 3. SW3 Font Select the font size required. 3. Click on the Print button to print the graphics files. Small Font: 5*7 dots Big Font: 10*15 dots Note: The graphics files for printing should be single-colour Monochrome Bitmap (.bmp) only.
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN 3.3 Replacing the Batteries 4.2 Setting the Connecting Port When the LO BAT LED is lit, replace the exhausted batteries with new ones as follows. Do not leave exhausted batteries in the printer as they may leak and cause damage to the printer.
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN Software Installation and Operation 3.4 Replacing the Thermal Paper roll 1. To ensure the paper enters the print mechanism easily, cut the end of the thermal 4.1 Software Installation paper roll into a triangle shape as shown in the following diagram: Place the CD-ROM in the CD drive on the computer and close the tray.
Page 18
PRINTER DESCRIPTION / EN PRINTER DESCRIPTION / EN Press the Feed button as required to move the paper through the print mechanism 5. When replaced and located correctly, the printer should appear as follows: until it appears at the top of the printer as shown below: Pass the paper through the paper cover and gently press the cover down to lock it in place as shown in the following diagram: 05/20/2010 Version No.1.0...