Advertisement
9. Accessories
• Battery Box – HL 680-8
• Antenna – Connector
• Nylon Case – HL 680-9
10.
Startup with Chronoprinter 540
• Ensure you have all the necessary cables:
• Configure the CP 540 as follows:
MENU (F)
See chapter 5.2.9 from Chronoprinter 540 user's manual.
• Ensure that you connect the Radio to the PC 540 and switch ON before starting a
new RUN (from the CP 540).
Press the key
The message "CONNECT" is displayed if the radios are able to connect together.
If the message "FAILED" is showing, ensure that all systems are set to the same
frequency and the distance is not too big (or other interference).
In case of no communication during a race, you can re-initialised the system by
pressing the key
CP 540.
Trick: if you need to resend a time from a CP 540, use the function "Duplicate" from
the CP 540 menu.
Cable D-Sub 25p / RS 232
Parameters
RS232
[ P0 ]
to test the connection between systems.
[ P1
], (RESET) . All times not yet transmit are memorized into the
Cable D-Sub 25p / Radio plug HL 680
To PC
9600 Bds. with Flow Ctrl
Advertisement
