1. Manuals
  2. Brands
  3. XenData Manuals
  4. Network Hardware
  5. SXL-1000
  6. Getting started

XenData SXL-1000 Getting Started

Archive system consists of a xendata sx-10 archive appliance, an oracle-storagetek sl150 library and accessories. the sx-10 has been preconfigured for use with the sl150 library
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
®
XenData
SXL-1000 Archive System:

Getting Started

Getting Started
The SXL-1000 Archive System
consists of a XenData SX-10 Archive
Appliance, an Oracle-StorageTek
SL150 library and accessories. The
SX-10 has been preconfigured for
use with the SL150 library. Please
first refer to this document for
system installation and operation
instructions.
Document last updated:
November 6, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SXL-1000 and is the answer not in the manual?

Questions and answers

Summary of Contents for XenData SXL-1000

  • Page 1: Getting Started

    Document last updated: November 6, 2014 Getting Started Getting Started The SXL-1000 Archive System consists of a XenData SX-10 Archive Appliance, an Oracle-StorageTek SL150 library and accessories. The SX-10 has been preconfigured for use with the SL150 library. Please first refer to this document for system installation and operation instructions.
  • Page 2 XenData Digital Video Archive...

  • Page 3: Table Of Contents

    Contents 1. SXL-1000 Models and Pre-Configuration 2. Setup and Connection Instructions 3. System Power-On Procedure 4. System Power-Off Procedure 5. Importing and Exporting LTO Cartridges 6. LTO Drive Cleaning 7. Contacting XenData Support XenData Digital Video Archive...

  • Page 4: Sxl-1000 Models And Pre-Configuration

    SXL-1000-90/2 207171 The image below shows the main components of an SXL-1000-90/1 or -90/2 system, with the XenData SX-10 Archive Appliance at the top and an SL150 library with two expansion units below. The SX-10 connects to the SL150 library via one or two SAS cables (supplied). The system connects to an Ethernet network via 1 GigE.

  • Page 5: Setup And Connection Instructions

    The SXL-1000 systems are pre-configured as follows.  The Windows 7 operating system and XenData software are licensed and activated on the SX-10. In addition, the device drivers for the SL150 are loaded on the SX-10.  The SL150 is configured with one reserve slot that is intended for a cleaning cartridge.
  • Page 6 When a near-line file is accessed over the network, the XenData software automatically transfers the file from LTO to disk cache. As soon as the file transfer to disk cache commences, the file transfer over the network also starts.

  • Page 7: System Power-On Procedure

    The Alert Module Administrator Guide is supplied on the SX-10 CD with the system and is also available from the XenData web site (www.xendata.com). Note: if you would like assistance to configure the SX-10, please contact XenData support. Contact details are provided in section 7 below.

  • Page 8: System Power-Off Procedure

     The imported cartridges(s) will be automatically recognized by the XenData software. 5.2 Exporting LTO Cartridges from the Library  Use the XenData Management Console and select the cartridge to be exported in the left pane of the console. Right click on the cartridge and select ‘Export’.

  • Page 9: Contacting Xendata Support

    7. Contacting XenData Support XenData Americas Support Group Phone +1 925 465 4300 Email support@xendata.com Hours: 8:00 AM to 5:00 PM Pacific XenData European Support Group Phone +44 1223 370114 (also from the USA via toll free number 1 866 742 4201) Email support@xendata.com...

Table of Contents