Advertisement
Cleaning and maintenance
First disconnect the plug from electrical outlet drain the hot water completely
and clean out after the body cools down.
Lid and main unit
With dirt off with soft dry cloth.
Inner pot
wash/wipe with sponge
Inner pot shows signs of being covered with scale
While you are using this unit, minerals dissolved in the water can get stuck on the
linner pot.
This is call scaling,and itis not harmful
To maintain the pot's performance, clean the pot once every three months by
using citric acid
How to clean the pot with citric acid
Due to the impurity in water,there may be some discolouring of steel surface.
Remove discolouring through procedures below.
1.Filllemon water to the"full water"mark.
2.Boil it and keep it in the pot for about an hour,Then empty jar and clean it with
a soft cloth.
3.To remove taste, boil water again and pour it out. Repeat procedure until
taste is gone.
Do not wipe off dirt with soap powder,scrubbing-brush,solvent
grind
powder, etc.
Do not splash or imerse the body or electric component with water to
avoid getting an electric shock.
6
~
Advertisement
