Table of Contents
Advertisement
Procyon Reader
ATTENTION: DO NOT CONNECT PROCYON TO A NON-PoE POWER SUPPLY. THIS WILL DAMAGE
4.4
Software Installation
The instructions that follow explain the software installation process:
1. Insert the accompanying CD into the CD tray of your computer or download the software
from www.star-int.net.
2. Start the RFIDCTRL-v1.3.msi (the version you obtain maybe newer than the version stated
here) program from the CD and follow the instructions in the installation wizard.
3. After you have installed the accompanying software on your computer and established a
network connection with the reader, you are ready to run the reader.
4.5
Starting Up The Reader
After established the PoE connection to the reader, it takes approximately 35 seconds for the reader
boot up. During the booting, the LED will blinks yellow, green and blue; when booting sequence
completed; the LED will show a static green in combination with a heart-beat blue. At this stage the
reader should have retrieved an IP address from the DHCP server, run the reader auto discovery tool
from the Windows Start Menu:
Windows may prompt you for firewall access of the discovery tool. Allow access on both private and
public networks:
Procyon Reader User Manual
PoE Injector
THE READER AND VOID THE WARRANTY
Revision 1.3
Last modified: 02/09/2015
Host Computer
8 |
P a g e
Hide quick links:
Advertisement
Table of Contents
