Advertisement
Important Safety Instructions
The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un-insulated "dangerous voltage " within
the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons .
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
8.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet.
9.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10.
Only use attachments/accessories specified by the manufacturer.
11.
Unplug this apparatus during lightning storms or when unused for long periods of time.
12.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.
TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.
THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.
BRYSTON LIMITED WARRANTY
Bryston analog audio products are warranted to be free from manufacturing defects for twenty (20) years from the original date of manufacture. The warranty includes parts and labour.
Bryston digital products and cables are warranted for five years from the original date of manufacture. The warranty includes parts and labour.
Bryston products having motorized moving parts, excluding motorized volume controls, are warranted for three years from the original date of manufacture. The warranty includes parts
and labour.
Bryston will remedy the problem by repair or replacement, as we deem necessary, to restore the product to full performance. Bryston will pay return shipping only for the full length of
the specific product's warranty.
In the event of a defect or malfunction, contact Bryston's repair centers for return authorization. Products must be returned using original packaging material only. Packing material may
be purchased from Bryston if necessary. This warranty is considered void if the defect, malfunction or failure of the product or any component part was caused by damage (not resulting
from a defect or malfunction) or abuse while in the possession of the customer. Tampering by persons other than factory authorized service personnel or failure to fully comply with Bryston
operating instructions voids the warranty. This warranty gives you specific legal rights and you may also have other rights which may vary from province to province and country to country.
As of 2006-02-22 Bryston will only warranty Bryston products purchased through authorized Bryston dealers. Bryston products with a date code of 0608 or higher (date code format is
"yyww", where "yy" is the two least significant digits of the year and "ww" is the week of the year) must be accompanied by a copy of the bill-of-sale from a Bryston authorized dealer to
qualify for warranty service. The warranty is transferable from the original owner to a subsequent owner as long as a copy of the bill-of-sale from the original authorized Bryston dealer
accompanies the re-sale. The copy of the bill of sale to any subsequent owner need ONLY include the Name of the Bryston Authorized Dealer and the Model and Serial number of the
Bryston product The warranty will only be honored in the country of the original purchase unless otherwise pre-authorized by Bryston.
BRYSTON SERVICE in CANADA:
BRYSTON SERVICE in the USA:
Postal address:
P.O. BOX 2170, Stn. Main
79 COVENTRY ST., Suite 5
PETERBOROUGH, ONTARIO
NEWPORT, VERMONT
CANADA K9J 7Y4
U.S.A. 05855-2100
Courier address:
677 NEAL DRIVE
PETERBOROUGH, ONTARIO
PHONE:
CANADA K9J 6X7
FAX:
E-mail:
usaser@bryston.com
PHONE:
705-742-5325
FAX:
705-742-0882
E-mail:
cdnser@bryston.com
2
BRYSTON SERVICE outside Canada and the USA:
contact your local distributor or
CHECK OUR WEB SITE:
www.bryston.com
E-MAIL BRYSTON DIRECTLY:
cdnser@bryston.com
FAX BRYSTON DIRECTLY:
01-705-742-0882
802-334-1201
PHONE BRYSTON DIRECTLY:
01-705-742-5325
802-334-6658
Table of Contents
Important Safety Instructions
....................2
General.........................................................3
Welcome
................................................3
Features
.................................................3
Shipping Box and Packing Material
......3
Placement..............................................3
Installation and Usage
................................3
Ripping CDs
.................................................4
Connecting to A/C Power
......................4
Connecting to BDP
................................4
Inserting and Ejecting CDs
....................4
Configuring CD Backup
.........................4
Entering Metadata
.................................5
Cover Art
................................................5
Executing the Backup
...........................5
General
Welcome
Thank you for your purchase of a Bryston BOT-1
Bryston Optical Transport. By adding an optical disc
drive to your BDP digital music player, you can now
rip and play CDs with your BDP without having to
use a computer. You can leverage the world-class
digital playback engine in your BDP to play CDs
back at equivalent quality to a ripped disc. You can
also rip CDs with a single button press to any of
the attached drives. Expanded features are easily
accessed through our comprehensive graphical
user interface useable on any modern web enabled
device. As with all Bryston equipment, we welcome
your questions, comments, and criticsm. Thank you
for owning Bryston.
Features
Bryston BOT-1 include the following:
•
DC power supply included. Or power from
optional BPS-3 multi-device power supply.
•
Connect to BDP with included USB cable (Type
A to Type Mini-B)
•
Slot loading optical drive.
•
Fully managed through Manic Moose web-based
graphical user interface.
•
Available in Black or Silver. Cosmetically
matches other Bryston C-Series components.
Playing CDs Directly
....................................6
CD Playback Method 1
..........................6
CD Playback Method 2
..........................6
Burning a Playlist
........................................6
Front Panel
..................................................7
Rear Panel
....................................................7
Specifications
..............................................7
Warranty
......................................................7
Shipping Box and Packing Material
Please keep the original shipping box and all
packing material. This will ensure the BOT-1 is
protected in future transport. In the unlikely event
you have a problem and must return it for service,
you must use the proper packing material. Ship
the BOT-1 only in the original packing material,
as the unit is not insurable by carriers otherwise.
Replacement packing materials, consisting of
a shipping carton with plastic foam inserts, is
available from Bryston for a small fee.
Installation and Usage
Placement
The BOT-1 is designed to occupy 1/3 the width of a
17" wide C-Series component. Therefore, the BOT-
1 is commonly placed on top of the BDP or other
Bryston C-Series component. However, placement
is not critical, and the BOT-1 can be placed beside
the BDP or elsewhere in the equipment rack. Do
not orient the BOT-1 in any position where it is
not resting on the 4 attached plastic feet since
unconventional orientation may increase the risk of
a disc jamming inside the transport.
3
Advertisement
