Advertisement
Nomenclature and Operation of Parts
O
e pownn:
When it is set to ON,
*00"
This is the Power switch
is displayed.
BANK/MIDI:
Used for selecting memory banks and setting MIDI
channels. When the UP button is pressed, the value
of the number displayed increases, and when
DO\ryN is pressed, it decreases.
e nqull,,tZER GAIN:
Used for èqualizing data for each channel' Seven
central frequency bands: 63 Hz, 160 Hz, 400 Hz,
I kHz. 2.5 kHz. 6.3 klj'z, 16 kHz. Maximum of
l2 dB boosting/cutting possible on each band'
@ ne.Nr uP:
Bank can be changed using a foot switch' Please con-
nect this to the Akai PS-X80.
a
@ lrNn:
This button sets the equalizing channel' When the
display shows "00," this button is not operational'
Channel settings are operational when the bank dis-
play shows u0-32."
Can also be used for setting MIDI channel'
@ copv/wRITE:
Equalizing data set on a particular channel can be
copied as the data of the next channel, or the multi-
equalizing data of a bank can be faithfully copied to
another bank, and the programmed data can be
written into the memorY bank.
Advertisement
