Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wallpro PS-1000
Summary of Contents for Wallpro PS-1000
-
Page 1: Operating Instructions
POWER SANDER OPERATING INSTRUCTIONS model PS-1000... -
Page 2: Specifications
Specifications Model No PS-1000 Voltage 230V /50Hz No load speed 650 ~1600/min Full load speed 280 ~ 950/min Power input 550W Sanding disc diameter 225mm Net weight 4.7 kg (10 lbs.) View of the Major Components & Accessories Sanding Head... -
Page 3: General Safety Rules
General Safety Rules WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and / or serious personal injury. The term ‘power tool’ in all of the warnings listed below refers to your mains-operated (corded) power tool. - Page 4 Do not overreach. Keep a proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
-
Page 5: Specific Safety Rules
Specific Safety Rules Keep hands away from rotating sanding head area at all times! Prolonged breathing of airborne dust from plasterboard sanding may effect respiratory function or cause serious respiratory illness. To reduce exposure to dust always wear approved protective equipment*, ensure Power Sander is connected to a vacuum approved for fine dust extraction and operate the tool in a well ventilated area. - Page 6 Total Extension Cord Length (feet) Cord Size (AWG) Unpacking Carefully remove the tool and all loose items from the shipping container. Retain all packing materials until after you have inspected and satisfactorily operated the machine. Carton Contents Power sander Vacuum cleaner hose Instruction manual DO NOT OPERATE THIS TOOL UNTIL YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL...
-
Page 7: How To Use The Tool
To install the vacuum cleaner hose: Unplug the machine. Plug the vacuum cleaner hose bayonet mount into the swivel mount in the back of the machine. Once the tangs of the bayonet mount are fully inserted in the slots, hold the swivel mount from turning and turn the hose bayonet mount clockwise to lock. -
Page 8: Sanding Operations
Mounting the Optional D-Handle Place the two D-Handle Brackets in place on the column forward of the grip. Thread in the 4 socket cap screws and tighten with the hex wrench located in the D-Handle. The D-Handle may then be placed in any of 3 angles. Position in the desired angle then thread in the 4 socket cap screws. - Page 9 Authorized Service Center for a thorough cleaning and lubrication. If the replacement of the power supply cord is necessary, this has to be done by the manufacturer or their agent in order to avoid a safety hazard. PS-1000 Wiring Diagram...
- Page 10 PS-1000 Exploded View...
- Page 11 PS-1000 Parts List NO. PARTS NAME NO. PARTS NAME Power Supply Cable Woodruff Key 3 X 8 Cord Armor Spindle Vacuum Extension Hose 4m First Drive Shaft 254mm Quick Release Hose Connector 38A First Drive Shaft 704mm Screw M4 X 16 Extension Column 539.22mm...
-
Page 12: Warranty
This Warranty will not apply if any of the following occurs during the relevant warranty period: 1. The product is serviced or repaired by anyone other than by a registered and approved Wallpro service agent 2. You use a Product contrary to the technical or operating environment guidelines recommended in its user guide or manual;... -
Page 14: Customer Service
CUSTOMER SERVICE 1300 653 177...