Audiovox BCS1 User Manual page 10

Installation with DUO (optional)
1. Disconnect the Apple 30 pin – 8 pin DIN cable from the interface module's "iPod port"
2. Connect the BCS1's 8 pin DIN cable in place of the iPod cable.
3. Do not connect the BCS1 or the iPod cable to the SATELLITE ONLY port of the module.
4. Do not connect the USB port or the Auxiliary cables of the BCS1 when the mini-DIN cable is
connected.
Note: The software for the DUO must be updated to accomodate the BCS1. For instructions, go to
www.audiovoxoei.com .
10