Acer X152H series User Manual page 16

6
# Icon Function
10 VGA
11 SD/USB A
12 LAN/WiFi
13 HDMI/DVI
14 SOURCE
15 HIDE
16 KEYSTONE
17 MENU
18
FREEZE
19 MEDIA_HOME No function.
20 MEDIA_SETUP No function.
21 VIDEO
22 COMPONENT
23 PgUp/PgDn
24 S-VIDEO
25 USB B
Note: Functions vary depending on model definition.
Press "VGA" to change source to the VGA connector. This
connector supports analog RGB, YPbPr (480p/576p/720p/
1080i), YCbCr (480i/576i) and RGBsync.
No function.
No function.
To change source to HDMI/MHL. (no DVI function)
Changes the active source.
Momentarily turns off the video. Press "HIDE" to hide the
image, press again to display the image.
Adjusts the image to compensate for distortion caused by
tilting the projector (± 40 degrees).
•
Press "MENU" to launch the Onscreen display (OSD)
menu, back to the previous step for the OSD menu
operation or exit the OSD menu.
•
Confirm your selection of items.
To pause the screen image.
To change source to COMPOSITE VIDEO.
No function.
For computer mode only. Use this button to select the next or
previous page. This function is only available when USB Ctrl
connector (mini type B) is connected to a computer via a USB
cable.
To change source to S-Video.
For USB control and firmware upgrade.
Description