GlucoMan Areo User Manual

ENGLISH
Blood glucose
●
monitoring system
User manual
Thank you for choosing the GlucoMen® areo meter.
We have designed this compact blood glucose meter for faster and
easier testing of your blood glucose and we hope it will be of great
help in the management of your diabetes. This manual explains how to
use your new meter. Before testing, carefully read through this manual
and the package inserts that come with it: GlucoMen® areo Sensor and
GlucoMen® areo Control. Pay particular attention to listed warnings and
cautions. Please keep this manual handy for future reference. If you have
any questions, please contact A. Menarini Diagnostics for assistance
(references at the end of this manual).

1. Intended use

Your GlucoMen® areo meter and GlucoMen® areo Sensor are in vitro
diagnostic medical devices to quantitatively measure the glucose level in
fresh capillary whole blood. They are intended for self testing to monitor
and control blood glucose levels by people with diabetes mellitus; they
can also be used in a clinical setting by healthcare professionals. They
are not intended for diagnosis or screening of diabetes or for neonatal
use. Do not alter your treatment on the basis of test results of this meter
without previously consulting your doctor or healthcare professional.
2. System overview
2.1 Meter
ENTER ( ) BUTTON
TEST STRIP PORT
Test strip should be inserted here.
ENTER ( ) BUTTON
Press and hold for 2 seconds to access meter memory (§5.1) or longer
(4 seconds) to enter setup mode while not testing (§6).
UP/DOWN ( / ) BUTTONS
Press or to scroll through different options and/or values.
RELEASE BUTTON
DATA TRANSFER PORT
RELEASE BUTTON
Press this button to remove used test strip.
BATTERY HOLDER
Houses two CR2032 3V lithium coin cell batteries.
DATA TRANSFER PORT
Connection port for PC data cable and Bluetooth device from A. Menarini
Diagnostics.
METER SCREEN
CLOCK/ALARM ICON
MEMORY ICON
CTL ICON
NFC ICON
LOW BATTERY ICON
WRONG TEMPERATURE ICON
MEMORY ICON:
CLOCK/ALARM ICON:
HYPO/HYPER ICONS:
FRONT
TEST STRIP PORT
UP/DOWN (
BUTTONS
BACK
NFC ANTENNA
BATTERY HOLDER
HYPO/HYPER ICONS
DROP ICON
MAIN DISPLAY AREA
UNIT OF MEASUREMENT
TIME
AVERAGE
MARKERS DATE
ICONS
indicates that you are using the memory
(§5).
"clock" appears while setting the time
(§6.1); "alarm" appears while setting the
acoustic reminder(s), and will be dis-
played if any alarm is on (§6.2).
appear while setting the hypoglycaemic
and hyperglycaemic thresholds and if
your test results are below or above these
values (§6.4).
/ )
1