Sanyo PLC-WXU30 Service Manual page 15

Mechanical Disassembly
b Power, Ballast, Lamp Cover Sw Board, Thermal Sw(SW902) removal
1. Remove the Power board.
. Remove the Ballast board.
3. Remove the Lamp cover switch board and thermal switch (SW90).
Power board
Ballast board
(T3x6)
(Black)
-15-
Isolation sheet ( sheet)
(T3x6)
(T3x6)x
Lamp cover
switch board
(T3x6)
(T3x6)
(T3x6)
(Black)
Themal switch
(SW90)
Fig.5