Axess SPBT1032 User Manual

Portable indoor/outdoor hi-fi cylinder 2.1 speaker with bluetooth-compatibility

Table of Contents

Need help?

Do you have a question about the SPBT1032 and is the answer not in the manual?

Page 2 Horn output: 3W x 2, 4Ω Subwoofer output: 12W, 4Ω Battery Capacity: 1000 mAh Frequency Response: 100-20Khz Power Supply: DC 3.7V Accessories: USB Charging Cable, Audio Cable, User Manual, Carrying Strap Copyright © 2014 Axess Products Corporation. All Rights Reserved...
Page 3: Appearance And Key Instructions
The “bt” on the screen will stop flashing and beep three times once connected successfuly. 3. Play the music from your mobile phone and enjoy. 4. Press LAST or NEXT button on the device or mobile phone to select songs. Copyright © 2014 Axess Products Corporation. All Rights Reserved...
Page 4 1. Power off the unit, and put the provided charge cable into the charge slot of unit. Connect the other end to a PC or other charger with 5V output (not included). Once connected properly, the red charging indicator light should keep flashing. Copyright © 2014 Axess Products Corporation. All Rights Reserved...
Page 5 2. Charge time is approximately 3-5 hours. When fully charged, the red charging indicator light will switch off. 3. In order to prolong the life of the battery, please do not charge more than 8 hours. Copyright © 2014 Axess Products Corporation. All Rights Reserved...