Page 2
Power On/Off and Standby Mode: To power on, slide switch up that is on the left side. If you do not make a selection within a minute the RadRecorder will go into Standby to preserve battery life. To wake from Standby Mode simply hold down the Play/Pause button for a few seconds.
Page 3
MP3 area you will need to press it twice. Recording Settings and Voice Activation: The RadRecorder has various recording settings. For highest quality recording at 384kbps select PCM setting. For medium quality at 192kbps, select Fine REC. For slightly lower quality to allow for more storage select Long REC.
Use our provided phone cable to connect from wall plugin to remaining socket in black box. Use the 3.5mm cable to connect from black box to mic hole on the RadRecorder. After call commences, simply hit Rec/Stop. Press Rec/Stop after call finishes. Deleting Files: From boot menu select “Record Mode”.
Page 5
“April Business Meeting” or “January To-Do list”, etc. PLEASE NOTE: Techerific will not be held liable for any data loss. Please backup regularly to avoid any problems!
Page 6
During playback, press M to adjust Repeat option or change Equalizer settings, press M again when desired option is highlighted. To copy songs to the RadRecorder, connect to computer with USB cable and copy .MP3 or .WMA files to outer area (not the RECORD folder).
Page 7
Warranty: Limited 2 Year Warranty: If the RadRecorder has issues where it stops working please return to us for a brand new unit. Contact us at our email address below to request a RMA number for return.
Need help?
Do you have a question about the RadRecorder and is the answer not in the manual?
Questions and answers