Lotsofbabies T3 Twin Instructions For Use Manual

Twin jogger and jockey seat

Advertisement

Quick Links

T3 Twin Jogger and
Jockey seat
Lotsofbabies Ltd
58 Cavendish Road,
Salford M7 4NQ
United Kingdom
0161 740 9979
www.lotsofbabies.com
PLEASE MAKE SURE ALL USERS OF THIS
PUSHCHAIR ARE FAMILIAR WITH ITS OPERATION
IMPORTANT KEEP FOR FUTURE REFERENCE

Advertisement

Table of Contents
loading

Summary of Contents for Lotsofbabies T3 Twin

  • Page 1 T3 Twin Jogger and Jockey seat Lotsofbabies Ltd 58 Cavendish Road, Salford M7 4NQ United Kingdom 0161 740 9979 www.lotsofbabies.com PLEASE MAKE SURE ALL USERS OF THIS PUSHCHAIR ARE FAMILIAR WITH ITS OPERATION IMPORTANT KEEP FOR FUTURE REFERENCE...
  • Page 2: Initial Setup

    Initial set up Attach the rear axle unit to the rear legs, push on until button locates in hole in mould- ing. Push small axle through rear wheel locate in axle unit and push chrome cap until axle firmly locked. Turn black swivel adjustment knob to the spot, then push in the swivel wheel unit.
  • Page 3: Handle Adjustment

    Handle Adjustment 1 Press in outer buttons with both hands, push handle up or down (just a short way) and hold position (pressure) 2 Release right hand side (keeping the pressure on left side). 3 Press middle button, handle locks will now be released, adjust handle up or down to next lock position.
  • Page 4 Remove jockey seat if fitted. Folding Move bumper bars to fit flat against front of seat Push up backrests The Jogger will fold to its smallest with its wheels re- moved. If the wheels are left on turn the large swivel wheel lock to ‘swivel’...
  • Page 5: Harness Adjustment

    Harness Adjustment DO NOT USE THIS PUSHCHAIR WITHOUT HAR- NESSING YOUR CHILD INTO THE SEAT. If the pushchair stops suddenly and your child is not strapped in he or she can easily be thrown out. 1 & 2 Put left hand clip on top of right hand. 3 Hold together and push inside clasp until locked Adjust slides on shoulder and waist straps...
  • Page 6 Jockey seat attachment DO NOT USE THIS SEAT WITHOUT HARNESSING 1 Open seat frame and slide front tubes into YOUR CHILD INTO IT. If the housing. pushchair stops suddenly and 2 Push firmly until spring button locks. your child is not strapped in he or she can easily fall out.
  • Page 7 Hoods and Rain Aprons To fit hoods over twins seats, push pegs into housings on the middle bar and slide and lock the outer clips on the outside bars. Attach velcro straps. Outer bar Middle bar To fit the fabric hood on the Jockey seat, pull away the fabric on the top arms and slide the peg into the housing.
  • Page 8 It may be unsafe to use replacement parts other than those supplied or approved by Lotsofbabies Ltd. Lotsofbabies Ltd 0161 740 9979 Manchester M7 4NQ WARNING: A CHILD’S SAFETY IS YOUR RESPONSIBILITY. Children should be harnessed in at all times and should never be left unattended. The child should be clear of moving parts whilst making adjustments.

Table of Contents