Advertisement
Quick Links
Pixpo IPP105 User Guide
Thank you for choosing the Pixpo IP Camera! Please follow the steps below to set it up.
1. Install PIXPO APP
1.1 Get free PIXPO app from Apple store.
Search "PIXPO" in the Apple store and install it
to your iPhone or iPad.
Connect the camera
1.2
Connect the network cable to your IP camera;
connect the other end of the network cable to
one of the LAN ports on your router. Connect
your camera power adapter to a power outlet.
The camera will start initializing, which will take
2-3 minutes.
Note: The camera head will tilt up and
down and pan left and right during
initialization
Pixpo iOS App Manual
To set up Wi-Fi connection, the camera must be
connected to router by a cable first. Then you
can scan for available SSIDs and enter the Wi-Fi
password. Wi-Fi settings are shown in step
2. Add a Camera
Open the PIXPO App and click on "Add
Camera".
2.1 Open the PIXPO App and click on "Add
Camera".
2.2 Default User ID is "admin" and the default
password is blank, leave it blank for first time
use.
4-1.
Page 1
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Pixpo IPP105
- Page 1 Pixpo IPP105 User Guide Thank you for choosing the Pixpo IP Camera! Please follow the steps below to set it up. To set up Wi-Fi connection, the camera must be 1. Install PIXPO APP connected to router by a cable first. Then you can scan for available SSIDs and enter the Wi-Fi password.
-
Page 2: Input The Camera Id
LAN search button to find your camera. And click on the 3.2 Click on the thumbnail picture to access the camera ID to add the camera. camera: Pixpo iOS App Manual Page 2... -
Page 3: Camera Setting
Tap to move the lens to up and down. Tap again to stop. Tap to move the lens left and right. Tap again to stop. Tap to flip the image horizontally Pixpo iOS App Manual Page 3... - Page 4 It will allow the user to change the refresh button.) settings over the internet. Set the visitor user ID and password. Guest users will be allowed to view the images, but they cannot change the settings. Pixpo iOS App Manual Page 4...
- Page 5 Conner, and put your new password in the password field. 4.4 Alarm Settings (advanced) 4.5 FTP Settings (advanced, third party FTP server required) Pixpo iOS App Manual Page 5...
- Page 6 4.7 SD Card Settings (not available on this camera) 4.6 Mail Settings (Advanced, third party SMTP server required) Pixpo iOS App Manual Page 6...
Need help?
Do you have a question about the IPP105 and is the answer not in the manual?
Questions and answers
when i go into the wifi setitnfs it says not settings i hit refresh obver and over and still comes up not settings so i just an super super confused
If your Pixpo IPP105 shows "no settings" in the Wi-Fi settings after refreshing, try the following:
1. Make sure the Wi-Fi password is entered correctly.
2. Ensure you are using a standard router, not one dedicated to specific devices like Roku or Internet TV, as these may block the IP camera.
3. Check your router's security settings, as some may block the usage of Wi-Fi cameras.
4. If the Wi-Fi network still does not show up, click the refresh button.
This answer is automatically generated