E V E N T / S E N S O; Hdd Event - CBC Digimaster DR8HL Instruction Manual

SYSTEM SETUP
EVENT / SENSOR
From the 'System Setup' menu, click on the 'EVENT / SENSOR' menu.
EVENT / SENSOR - HDD EVENT
The DVR will continually monitor the health of the hard drives in the system and detect problems that may be developing.
SMART ALARM: Enables S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology) hard disk monitoring.
CHECK INTERVAL: Frequency of testing.
DISK FULL EVENT: Determines whether a 'Disk Full' condition would result in a HDD event.
EVENT / SENSOR - ALARM INPUT
The menu will determine the behavior of each of the 4 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled.
TYPE: Alarm inputs can be set as normally open (N/O) or normally closed (N/C).
Click on the 'HDD EVENT' menu, and choose any field.
. Use the button to modify the value.
Click on the 'ALARM INPUT' menu, and choose any field.
Use the button to modify the value.
42