Sharp LC-32P50E Service Manual page 19

3. Entering and exiting the adjustment process mode
(1) Unplug the AC power cord of running TV set to force off the power.
(2) While holding down the "VOL (–)" and "INPUT" keys on the set at once, plug in the AC power cord to turn
on the power. The letter K appears on the screen.
(3) Next, hold down the "VOL (–)" and "P (Ù)" keys on the set at once. Multiple lines of blue characters appear-
ing onscreen indicate that the set is now in the adjustment process mode. If you fail to enter the adjustment
process mode (the display is the same as normal startup), retry the procedure.
(4) To exit the adjustment process mode after the adjustment is done, unplug the AC power cord to force off the
power. (When the power is turned off with the remote controller, once unplug the AC power cord and plug it
in again. In this case, wait 10 seconds or so before plugging.)
Caution: Use due care in handling the information described here lest the users should know
how to enter the adjustment process mode. If the settings are tampered with in this
mode, unrecoverable system damage may result.
4. Remote controller key operation and description of display in adjustment process mode
(1) Key operation
Remote controller key
P (ù/Ù)
VOL (+/–)
Cursor (UP/DOWN)
Cursor (LEFT/RIGHT)
INPUT SOURCE
on remote controller
OK
` Input mode is switched automatically when relevant adjustment is started so far as the necessary input
signal is available.
(2) Description of display
(2) Current page title
(1) Current page /
Total pages
1/12
[INFO]
MAIN Version
Dev Version
CPLD Version
NORMAL STANDBY CAUSE
ERROR STANDBY CAUSE
Main unit key Function
P (ù/Ù) Moving an item (line) by one (UP/DOWN)
VOL (+/–) Changing a selected item setting (+1/–1)
Turing a page (PREVIOUS/NEXT)
Changing a selected line setting (+10/–10)
INPUT button Input source switching(toggle switching)
(TV -> EXT1 -> EXT2 -> EXT3 -> EXT4)
Executing a function
(3) Currently selected input
(4) Current color TV system
AUTO
AUTO:EURO
TV
1.XX (XX/XX/XXX)
XX
XX
XX
XX
21
LC-26P50E
LC-32P50E
LC-37P50E
(5) Destination
Adjustment process menu header
(7) Parameters