Display Indicators; Inserting Batteries In The Remote Control; Connecting Dvd-Vcr To The Tv Using The A/V Cable - Samsung DVD-V645K Instruction Manual

Display Indicators

1 2
1 The DVD Deck is active
2 A DVD, CD, VCD, or SVCD is loaded
3 The time, counter position, time remaining or
current deck status is displayed
4 VHS tape is inserted
5 The VCR Deck is active
6 A Timer Recording is programmed or in progress.
Inserting Batteries in the
Remote Control
You must insert or replace the batteries in the remote
control when you:
Purchase the DVD-VCR
Find that the remote control is no longer
working correctly
1
Push the tab in the direction of the arrow to release
the battery compartment cover on the rear of the
remote control.
2
Insert two AAA, RO3 or equivalent batteries, taking
care to respect the polarities:
+ on the battery with + on the remote control
– on the battery with – on the remote control
3
Replace the cover by aligning it with the base of
the remote control and pushing it back into place.
Do not mix different battery types (manganese
and alkaline for example).
Downloaded From Disc-Player.com Samsung Manuals
3 4 5
6
1
Connecting DVD-VCR to the
TV using the A/V Cable
You can connect your DVD-VCR to the television using
the A/V cable if the appropriate input is available on
the television. You thus:
Obtain better quality sound and pictures
Simplify the setting up procedure of your
DVD-VCR
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the
screen when the DVD-VCR is switched off.
Make sure that both the television and the
DVD-VCR are switched off before connecting the
cables.
1
Connect the coaxial cable as indicated on page 6.
2
Connect one end of the Audio/Video cable to the
Video output and Audio L, R output socket on the
rear of the DVD-VCR.
3
Plug the other end into the appropriate connector
on the television.
4
To view DVD-VCR, you must select AV mode on
your TV.
(DVD-V645K)
2
(DVD-V642K)
2
TV
3
TV
3