Advertisement
Quick Links
Troubleshooting guide
PROBLEM: Low output voltage
Possible Cause
E:Can inverter is overloaded.
Unsure about the appliance rating.
PROBLEM: Re-occurring low battery shutdown
Possible Cause
Inadequate power or excessive voltage drop.
Poor battery condition.
PROBLEM: No power output
Possible Cause
E:Can inverter in thermal shut down condition.
Low battery voltage.
E:Can inverter blown fuse.
Vehicle blown fuse (DC socket).
Poor DC plug connection.
PROBLEM: Liquid ingress
Possible Cause
Drinks spillage.
SPECIFICATIONS
PowerSource Model
Part Number
Max. Continuous power (Watts)
Peak Power (Watts) 0.01 Seconds
Standby current (Amps)
Waveform
Efficiency*
Input Voltage Range
AC Socket
Product Dimensions (mm) (D x H)
Pack Dimensions (mm) L x W x H
Cable length (mm)
*Percentage of battery power to mains voltage power.
e
and
approved
This inverter should only be used to power Class II (non earthed) products, identified by the symbol:
Distributed by: Ring Automotive Limited, Volvox House, Gelderd Road, Leeds, England LS12 6NA
+44 (0)113 213 2000
autosales@ringautomotive.co.uk
Can Inverter
Suggested Remedy
Reduce load, not exceeding E:Can maximum rating.
(Consider upgrade, RINV300 to 3000).
Check the data label on the appliance or the instructions. If
this is unsuccessful consult the manufacturer.
Suggested Remedy
Check connections from battery to E:Can inverter.
Replace or charge battery.
Suggested Remedy
Remove power and load, allow to cool (10 minutes).
Charge or replace battery.
Check / replace the 15Amp fuse in the DC plug.
Check vehicle handbook to locate relevant fuse.
Use the DC plug switch to ensure a good connection.
Suggested Remedy
Unplug the E:Can and wipe immediately with a dry cloth
(Permanent damage can occur with liquid ingress).
E:Can
RINVC120
120w (5 mins) 100w (4 hours)
200w
<0.3A
Modified Sine Wave
90%
10v – 15v DC
3 Pin mains 230v AC
66 x 160
150 x 100 x 210
450
+44 (0)113 231 0266
www.ringautomotive.co.uk
Can Inverter
12v DC to 230v AC Mains Inverter
RINVC120
User Manual
www.ringautomotive.co.uk
RETAIN THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ring Powering E:Can
Summary of Contents for Ring Powering E:Can
- Page 1 Use the DC plug switch to ensure a good connection. Can Inverter PROBLEM: Liquid ingress Possible Cause Suggested Remedy Drinks spillage. Unplug the E:Can and wipe immediately with a dry cloth (Permanent damage can occur with liquid ingress). SPECIFICATIONS 12v DC to 230v AC Mains Inverter PowerSource Model E:Can...
- Page 2 Introduction Operating Tips The Ring E:Can inverter is an electronic device that converts a low voltage 12v DC current from a battery, or NOTE: The PowerSource is not designed to run products other power supply and provides 230v AC current.
Need help?
Do you have a question about the E:Can and is the answer not in the manual?
Questions and answers