7850 East Gelding Drive • Scottsdale, AZ 85260-3420
1. General Controller Features
The CL01 Version 1.2 controls two OLED (64x48) SmartSwitches or two OLED (52x36) SmartDisplays. The
firmware can be customized based on customer requirements. Below are current features:
• Controls two OLED (64x48) SmartSwitches or two OLED (52x36) SmartDisplays
• Serial communication via RS232 (57.6K, 1 start bit, 8 bit , 1 stop bit)
• On board microSD Flash that can hold up to 65,536 images
• Optional audio feedback while switch is pressed.
• Program responses to switch-actions events and timer-expire events.
• User programmable for images, attributes and set-ups.
• Command the controller to display images in real time.
• Direct communication from host to the OLED modules.
• Set the type of activity reports from the controller to host.
• Brightness settings to extend OLED life.
• Reports switch activity and timer expiration via serial port.
• Stand alone operation or real time control by host.
2. Compatible Logic Boards
The following is a list of compatible Logic Boards and switches.
• IS-L02L1 Logic Board for two OLED (64x48) SmartSwitches
• IS-L02P1 Logic Board for two OLED (52x36) SmartDisplays
CL01 User Manual
Toll Free 1.877.2BUYNKK (877.228.9655) • Phone 480.991.0942 • Fax 480.998.1435
CL01 Intelligent Controller User Manual
www.nkksmartswitch.com • Email smartswitch@nkkswitches.com
Page 3 of 24
0209