EZiCaddy EZi-5 Digital User Manual page 20

4. Press the right hand button and the next feature you can change
(COMP) will flash.
5. Press the right hand button again and the next feature you can
change (PIN) will flash.
6. Press the control knob to and you will be presented with a
flashing first digit.
7. Rotate the control knob to the digit of your choice.
8. Press the control knob to save and move on to the next digit.
9. Repeat until you have saved the number.
10. The display will read "PIN" and "ON"
11. To save and exit, press and hold down both Left Hand and Right
Hand buttons simultaneously.
Now, whenever you connect your battery, your display screen will light
up with a flashing "0---" and you will need to enter your 4 digit PIN as
follows:
1. Select the first number of the PIN by rotating the control knob.
2. Push this knob to confirm and move on to the next number.
3. Repeat steps 1 and two for the remaining numbers.
If you get the PIN wrong, the screen will revert to the first digit and you
will not be able to use your EZiCaddy until you enter the correct PIN.
There are no limits to the number of attempts at getting the PIN right.
Page 20