Page 2
Congratulations on your excellent choice of loudspeaker! We hope that you will have a great deal of happy audio moments with your Aurelia Cerica loudspeakers for many years to come! We recommend that you carefully read the user manual through and follow the guidelines which are provided.
Stand installation Fig 1. The loudspeakers are supplied with stands, consisting of a stand plate and three stand tubes. The package also includes the following parts which are required for the installation of the stand: - A stand pipe 6 pcs - Attachment screw M8 6 pcs - Pieces of felt...
The connection of an amplifier to the Presence- switch loudspeakers The Aurelia Cerica has switch located on the rear panel, which can be NOTE! Always switch the amplifier off before connecting or used to fine-tune the tonal balance of the speaker.
Page 5
50 cm Fig 2. Positioning of speakers in the listening area Aurelia Cerica speakers are more directional than ordinary speakers and therefore, their positioning in the listening area is easier than normal. Due to the directionality, sound reflected from...
Fault situations Technical specifications All Aurelia loudspeakers are measured, tested and checked at the factory during their manufacture. If an error nonetheless occurs with Operational principle 2-way bass reflex the loudspeakers, they should be returned to the relevant retailer.
Page 7
Tel +358-44-5303935 info@aurelia.fi www.aurelia.fi aurelia is a registered trademark, owned by ASL Technosystems OY.
Need help?
Do you have a question about the cerica and is the answer not in the manual?
Questions and answers