DC jack to the back of the unit. (DC5.5V plug) Your AD500 clock radio is ready. BACKUP BATTERY INSTALLATION Your AD500 clock radio requires the CR2032 lithium battery (included) to provide backup power to the clock in case of tem- porary power interruption.
5. Press SET again or if no key pressed for approx. 10 seconds to exit the setting mode. Note: when 12-hour time format is selected, the P (PM) icon will appear on the lower middle time display to indicate the after- noon time;...
Page 4
/ NAP or RADIO / Note: When alarm is sounding, press the SLEEP will activate the nap timer or the radio and stop the alarm for the day. SNOOZE OPERATION (default snooze duration is 5 minutes) When alarm is sounding, presses once, the alarm will be silenced and come on again after the set snooze duration.
Note: If the nap time is set up while your alarm is sounding, your nap time will be cancelled automatically. SETTING UP THE FM ANTENNA Extend the FM wire antenna fully and vary the direction for best FM reception. Do not strip, alter or attach to other antennas. LISTENING TO THE FM RADIO 1.
USING THE PRESET MEMORY This clock radio features a total of 10 preset memories of FM stations. These allow you to preset your favorite stations and access them quickly. 1. Turn on the radio and select a radio station you like to memo- rize.
USING THE PROJECTION Press once at the left side of your unit to turn on or off the projection. When the projection is on, press and hold to flip the projected time upside down. At the back of your unit, turn the rotary knob to rotate the pro- jected time by 90 degrees.
CARE OF YOUR PRODUCT 1. Place your clock radio on a stable surface, away from sources of direct sunlight or excessive heat or moisture. 2. Protect your furniture when placing your units on a natural wood and lacquered finish by using a cloth or protective ma- terial between it and the furniture.
Limited One-Year Warranty ADDEX Design. warrants this product to be free from defects in workmanship and materials, under normal use and condi- tions, for a period of one year from the date of original purchase.
Page 10
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the war- ranty period, ADDEX Design will repair or, at its discretion, re- place this product without charge. Please contact the below for repairing including the proof of purchase and date of purchase.
Need help?
Do you have a question about the AD500 and is the answer not in the manual?
Questions and answers