19.Only use SALAV accessories on your SALAV appliance. The use accessory attachments other than those provided by SALAV may result in fire, electric or irreversible damage to the appliance.
Cap Connector Pole Connector & Fabric Brush Pants Press Telescopic Pole Steam Nozzle Drain Plug PRODUCT SPECIFICATION Model GS06-DJ Water Tank Capacity 1.3L Steam Output Time 45 seconds Input Voltage 110 - 120V, 60Hz Output Power 1260 - 1500W...
Page 4
Insert the Telescopic Pole Attach the Folding Hanger to the top of the and tighten the Pole Telescopic Pole. Extend the Telescopic Pole Connector. to desired height and lock in place. Unscrew to loosen Install the Steam Hose and tighten Fully extend Hanger Arms and hang the the Hose Connector.
Page 5
Remove the Cap. Fill the Water Tank. Plug in & Turn on. Replace & tighten the Cap. Heats up in 45s. Ready for steaming.
Page 6
Collapse and remove the Turn off the unit and unplug it. Wait at Telescopic Pole & Steam Nozzle. least 30mins until the unit cools down Remove the Water Tank and set completely. aside. Carefully turn unit over to unscrew the drain plug. Turn off and unplug the unit and cool Wait for 40mins, unscrew the Drain Plug and for at least 30mins.
Need help?
Do you have a question about the GS06-DJ and is the answer not in the manual?
Questions and answers
When will the steam start
The steam for the Salav GS06-DJ will start 45 seconds after turning it on.
This answer is automatically generated
how do you adjust the hanger arms for smaller garments
where can i get the overload for this steamer