Page 1
Introduction Thank you for choosing Xcellon. Congratulations on the purchase of your new Xcellon KSWL-10 Silicone Keyboard. This keyboard features a wireless design, transmitting at 2.4 GHz for up to 30 ft of working distance. The keyboard, which also features a touchpad that replaces a standard two-button...
Connecting the Keyboard To connect your keyboard, remove the USB receiver from underneath the keyboard, plug it into an available USB port on your computer, and wait for your computer to recognize the device – it may take a few seconds. If your keyboard does not respond, try replacing the batteries (see Replacing the Batteries chapter) or using a diff erent USB port.
Replacing the Batteries The Xcellon KSWL-10 Silicone Keyboard requires two AAA batteries to function. To replace the batteries, use the supplied Phillips screwdriver to loosen and remove the four screws from the battery chamber door. When inserting fresh batteries, be sure to insert them in the proper direction.
Page 4
WARRANTY: Xcellon provides a limited warranty that this product is free from defects in materials and workmanship to original purchaser under normal use for a period of one (1) year from the original purchase date. Xcellon’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at its option, of any product which fails during normal consumer use.
Need help?
Do you have a question about the KSWL-10 Silicone and is the answer not in the manual?
Questions and answers