Connections; Connecting A Tv Antenna / Cable / Satellite; Connecting An A/V Device - SONIQ QSP425T Instruction Manual

Connections

CONNECTING A TV ANTENNA
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
Note:
For receiving over-the-air TV broadcasts, we recommend that you use
an external fixed antenna. Should you require the use of a temporary
antenna, please ensure that you purchase an antenna with sufficient
ability to receive in weak signal areas. Only when you are in close
proximity to a transmitter will a temporary antenna reproduce a signal
as strongly as a fixed antenna.
TV
ANTENNA
TV antenna cable to TV
ANTENNA terminal
(cable not included)

CONNECTING AN A/V DEVICE

To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
Connecting to a VCR / Camcorder / Satellite System / Cable
Connect the AUDIO and S-VIDEO cable (not included) as shown:
Make sure you connect the cable from the other equipment (AUDIO OUT and S-VIDEO OUT) to this unit AV IN 2 (AUDIO IN and S-VIDEO IN).
NOTES:
• In AV mode, the unit will be power off automatically if no signal has been input for 15 minutes.
• Please refer to the user manual for the other equipment for more information.
To AUDIO
IN jacks
(AV IN 2)
S-VIDEO
To S-VIDEO
To S-VIDEO OUT /
IN jack
AUDIO OUT jacks
VCR/CAMCORDER/
SATELLITE SYSTEM/
CABLE, etc.
- 9 -