Table of Contents
Advertisement
Main Menu
Table of Contents
Doing any of the following after
pressing the MEMO button will
cancel the storing procedure.
Not pressing a memory button
within 5 seconds.
Readjusting the seat position.
Readjusting the outside mirror
position.
Each memory button stores only one
driving position. Storing a new
position erases the previous setting
stored in that button's memory. If
you want to add a new position while
retaining the current one, use the
other memory button.
All stored driving positions will be
lost if your car's battery goes dead or
is disconnected.
Selecting a Memorized Position
M
M
E
E
M
M
O
O
R
R
Y
Y
B
B
U
U
T
T
T
T
O
O
N
N
S
S
You can select memorized positions
as follows.
1.
Make sure the parking brake is set
and the shift lever is in Park (A/T)
or a forward gear (M/T).
2.
Press the desired memory button
(1 or 2) until you hear a beep, then
release the button.
Driving Position Memory System
The system will move the seat and
outside mirrors to the memorized
positions. The indicator light in the
selected memory button will flash
during movement. When the
adjustments are complete, you will
hear two beeps and the indicator
light will remain on.
Notes for Type-S with M/T
You cannot select a memorized
position if the transmission is in
Reverse. Shift to another gear,
then select.
If the parking brake is not set, you
must press and hold the memory
button until the adjustment is
complete.
Instruments and Controls
CONTINUED
101
Advertisement
Chapters
Table of Contents
