Advertisement
u S e
This USB 2.0 internal card reader enables you to quickly and easily transfer files between
various types of memory cards and your PC.
All kinds of files can be moved, stored, copied and deleted, including documents, films, images,
games and music. Ideal for use with your GSM, digital camera or PDA. You can even quickly
connect a USB device, which is then available via the card reader.
H a r d W a r e I n S t a l l a t I O n
Before installing the hardware, take the following precautionary measures:
Ensure that the PC is switched-off and that the power is disconnected. After removing the
screws to open the computer housing, you can install the card reader in a 3.5" bay.
Plug the card reader's connector to an available USB port (usually blue) on your motherboard.
Before use, we recommend that you consult the manual for your motherboard or computer on
this point.
Once the card reader has been installed, you can replace the cover on the computer housing and
properly reconnect all the cables that you had removed from the PC.
Windows will automatically detect the new hardware upon reboot and load the default drivers
already available in Windows.
As soon as the drivers have been installed, the card reader is ready for use. We advise you to
reboot your computer before using the card reader with USB port.
S O F t W a r e I n S t a l l a t I O n
Windows XP, Vista and/or Windows 7 do not require driver installation. The Plug & Play
technology makes everything very simple. The extra drivers loaded by Windows allow files from
a range of memory cards to be made accessible and ready for potential processing.
Advertisement
